Re: [PATCH 0/7] drivers/hwmon: Add On-Chip Controller (OCC) hwmon driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 06/22/2017 11:52 PM, Guenter Roeck wrote:
On 06/22/2017 03:48 PM, Eddie James wrote:
From: "Edward A. James" <eajames@xxxxxxxxxx>

This series adds a hwmon driver to support the OCC on POWER8 and POWER9
processors. The OCC is an embedded processor that provides realtime power and
thermal monitoring and management.

This driver has two different platform drivers as a "base" for the
hwmon stuff, as the means of communicating with the OCC on P8 and P9 is
completely different. For P8, the driver is an I2C client driver. For P9 the driver is an FSI-based OCC client driver, and uses the OCC driver in-kernel
API.

There was a previous version of this driver that wasn't written with the
differences in communication methods between the two versions in mind. This
driver has been considerably simplified.


I thought I did see this before.

It is customary to use "v2" in such situations, and add a change log.
You expect me to go into the two versions and compare them to figure
out what changed to evaluate if it makes sense. Do you really believe that
I have enough time to do that, and that I would be willing to spend that
time in the first place ?

Presumably you know what changed. Why not just tell me ?

Hi,

This driver does not build upon the previous patch set at all, so I didn't mark it as a v2. It is completely rewritten from scratch. I sent a note saying that the previous patch set was abandoned. There may be some similarities with the previous one, simply because the drivers do the same thing, but I don't think there is any need to compare it with the old driver I mailed out.

Thanks for your time,
Eddie


Guenter

Edward A. James (7):
   drivers/hwmon: Add On-Chip Controller (OCC) hwmon driver
   drivers/hwmon/occ: Add command transport method for P8 and P9
   drivers/hwmon/occ: Parse OCC poll response
   drivers/hwmon/occ: Add sensor types and versions
   drivers/hwmon/occ: Add sensor attributes and register hwmon device
   drivers/hwmon/occ: Add non-hwmon attributes
   drivers/hwmon/occ: Add error handling

  Documentation/ABI/testing/sysfs-driver-occ-hwmon   |   77 ++
  .../devicetree/bindings/fsi/ibm,p9-occ-hwmon.txt   |   18 +
  .../devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt   |   25 +
  Documentation/hwmon/occ                            |   84 ++
  drivers/hwmon/Kconfig                              |    2 +
  drivers/hwmon/Makefile                             |    1 +
  drivers/hwmon/occ/Kconfig                          |   28 +
  drivers/hwmon/occ/Makefile                         |   11 +
drivers/hwmon/occ/common.c | 1242 ++++++++++++++++++++
  drivers/hwmon/occ/common.h                         |  151 +++
  drivers/hwmon/occ/p8_i2c.c                         |  250 ++++
  drivers/hwmon/occ/p9_sbe.c                         |  144 +++
  12 files changed, 2033 insertions(+)
  create mode 100644 Documentation/ABI/testing/sysfs-driver-occ-hwmon
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ-hwmon.txt create mode 100644 Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
  create mode 100644 Documentation/hwmon/occ
  create mode 100644 drivers/hwmon/occ/Kconfig
  create mode 100644 drivers/hwmon/occ/Makefile
  create mode 100644 drivers/hwmon/occ/common.c
  create mode 100644 drivers/hwmon/occ/common.h
  create mode 100644 drivers/hwmon/occ/p8_i2c.c
  create mode 100644 drivers/hwmon/occ/p9_sbe.c



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux