On Fri, Jun 23, 2017 at 11:49:38AM +0200, Richard Genoud wrote:
> On 21/06/2017 12:21, Uwe Kleine-König wrote:
> > From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> >
> > We just got a common helper for parsing the rs485 specific
> > device tree properties. Use it and drop the open coded parser.
> >
> > Note that the common function is more strict, so some device trees
> > needed fixing in the previous commit.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> > ---
> > Cc: Richard Genoud <richard.genoud@xxxxxxxxx>
> >
> > drivers/tty/serial/atmel_serial.c | 17 +----------------
> > 1 file changed, 1 insertion(+), 16 deletions(-)
> >
> > diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> > index b753d2020068..a6b0c0087e2d 100644
> > --- a/drivers/tty/serial/atmel_serial.c
> > +++ b/drivers/tty/serial/atmel_serial.c
> > @@ -1706,22 +1706,7 @@ static void atmel_init_rs485(struct uart_port *port,
> > struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
> >
> > if (np) {
> > - struct serial_rs485 *rs485conf = &port->rs485;
> > - u32 rs485_delay[2];
> > - /* rs485 properties */
> > - if (of_property_read_u32_array(np, "rs485-rts-delay",
> > - rs485_delay, 2) == 0) {
> > - rs485conf->delay_rts_before_send = rs485_delay[0];
> > - rs485conf->delay_rts_after_send = rs485_delay[1];
> > - rs485conf->flags = 0;
> > - }
> > -
> > - if (of_get_property(np, "rs485-rx-during-tx", NULL))
> > - rs485conf->flags |= SER_RS485_RX_DURING_TX;
> > -
> > - if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
> > - NULL))
> > - rs485conf->flags |= SER_RS485_ENABLED;
> > + of_get_rs485_mode(np, &port->rs485);
> > } else if (pdata) {
> > port->rs485 = pdata->rs485;
> > } else {
> >
> I don't kown if the serie will make it to 4.12, but as you may have
> noticed, this patch will break with tty-next.
I'm pretty sure it won't make it into 4.12 given we're already at -rc6.
And there is a v2 that should apply on top of tty-next. (I have it on
4.12-rc6 + the two patches by Alexandre Belloni.)
> In fact, you could get rid of atmel_init_rs485() and just replace it
> with of_get_rs485_mode() :)
As mentioned in the v2 thread I plan to do this for v3.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
