Re: [PATCHv11] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Jan 13, 2014 at 03:22:05PM +0100, Denis Carikli wrote:
> The following devices/functionalities were added:
>  * Main and secondary UARTs.
>  * i2c and the pcf8563 device.
>  * Ethernet.
>  * NAND.
>  * The BP1 button.
>  * The LED.
>  * Watchdog
>  * SD.
> 
> Cc: Eric Bénard <eric@xxxxxxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
> Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
> Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
> ChangeLog v10->v11:
> - The other patches in this serie have already been applied in the for-next branch
>   in Shawn Guo's tree at git://git.linaro.org/people/shawnguo/linux-2.6.git :
>     4449d01 ARM i.MX35: build in pinctrl support.
>     cd01fd4 ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.
> - Reordered the Cc list and dropped the Cc to the devicetree binding maintainers.
> - Moved the pins of the hoggrp inside their respective node, the bp1 and led1 nodes
>   were updated accordingly.
> - The esdhc1's gpio was fixed: the card detect code will never uses the gpio "active"
>   high/low setting, instead it uses that GPIO as an IRQ.
> - Cosmetic fixes in the uart pinctrl nodes.
> 
> ChangeLog v9->v10:
> - Added Fabio Estevam To the Cc list
> 
> ChangeLog v8->v9:
> - Added the dtb target into arch/arm/boot/dts/Makefile.
> - Added a blank line before the pcf8563 node in the i2c1 node.
> - Whitespace cleanups as requested by Shawn Guo.
> - _' was used in label, it's now fixed (it has been replaced with '-').
> - The recently introduced defines for input and gpios are now used.
> - The uarts had the fsl,uart-has-rtscts property set, but they didn't use 
>   any rts and cts pins in the uart pinctrl nodes.
> 
> ChangeLog v7->v8:
> - The commit message was improved.
> - The board specific iomuxc pins group configuration that were in imx35.dtsi were moved here.
> - The rest of the patch was updated accordingly.
> 
> ChangeLog v6->v7:
> - Added Grant Likely in the Cc list.
> - Shortened the license.
> - The tsc2007 pads were moved in another patch.
> 
> ChangeLog v5->v6:
> - Shawn Guo was added in the Cc.
> ---
>  arch/arm/boot/dts/Makefile                         |    1 +
>  arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi       |   59 +++++++++
>  .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts  |  137 ++++++++++++++++++++
>  3 files changed, 197 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
>  create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 059d280..d41edc7 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -143,6 +143,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
>  	imx27-phytec-phycard-s-som.dtb \
>  	imx27-phytec-phycard-s-rdk.dtb \
>  	imx31-bug.dtb \
> +	imx35-eukrea-mbimxsd35-baseboard.dtb \
>  	imx50-evk.dtb \
>  	imx51-apf51.dtb \
>  	imx51-apf51dev.dtb \
> diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> new file mode 100644
> index 0000000..303f789
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> @@ -0,0 +1,59 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "imx35.dtsi"
> +
> +/ {
> +	model = "Eukrea CPUIMX35";
> +	compatible = "eukrea,cpuimx35", "fsl,imx35";
> +
> +	memory {
> +		reg = <0x80000000 0x8000000>; /* 128M */
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	pcf8563@51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +};
> +
> +&iomuxc {
> +	imx35-eukrea {
> +		pinctrl_fec: fecgrp {
> +			fsl,pins = <MX35_FEC_PINGRP1>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <MX35_I2C1_PINGRP1>;
> +		};
> +	};
> +};
> +
> +&nfc {
> +	nand-bus-width = <8>;
> +	nand-ecc-mode = "hw";
> +	nand-on-flash-bbt;
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> new file mode 100644
> index 0000000..833bd1f
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> @@ -0,0 +1,137 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "imx35-eukrea-cpuimx35.dtsi"
> +
> +/ {
> +	model = "Eukrea CPUIMX35";
> +	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +
> +		bp1 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_bp1>;

Shouldn't the pinctrl state be added in the parent node?

> +			label = "BP1";
> +			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
> +			linux,code = <BTN_MISC>;
> +			gpio-key,wakeup;
> +			linux,input-type = <1>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led1 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_led1>;

Ditto

Shawn

> +			label = "led1";
> +			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> +
> +&audmux {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux>;
> +	status = "okay";
> +};
> +
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1>;
> +	cd-gpios = <&gpio3 24>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	tlv320aic23: codec@1a {
> +		compatible = "ti,tlv320aic23";
> +		reg = <0x1a>;
> +	};
> +};
> +
> +&iomuxc {
> +	imx35-eukrea {
> +		pinctrl_audmux: audmuxgrp {
> +			fsl,pins = <MX35_AUDMUX_PINGRP1>;
> +		};
> +
> +		pinctrl_bp1: bp1grp {
> +			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
> +		};
> +
> +		pinctrl_esdhc1: esdhc1grp {
> +			fsl,pins = <
> +				  MX35_ESDHC1_PINGRP1
> +				  MX35_PAD_LD18__GPIO3_24  0x80000000 /* CD */
> +			>;
> +		};
> +
> +		pinctrl_fec: fecgrp {
> +			fsl,pins = <MX35_FEC_PINGRP1>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <MX35_I2C1_PINGRP1>;
> +		};
> +
> +		pinctrl_led1: led1grp {
> +			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
> +		};
> +
> +		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
> +			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +				MX35_UART1_PINGRP1
> +				MX35_UART1_RTSCTS_PINGRP1
> +			>;
> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <
> +				MX35_UART2_PINGRP1
> +				MX35_UART2_RTSCTS_PINGRP1
> +			>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	fsl,mode = "i2s-slave";
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> -- 
> 1.7.9.5
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux