From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> The i.MX driver defaulted to full duplex rs485 which is rather unusual and doesn't match the default implemented in other drivers. So change the default to half duplex. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: Fabio Estevam <fabio.estevam@xxxxxxx> drivers/tty/serial/imx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index bbefddd92bfe..d5deeef0cd5b 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2137,8 +2137,7 @@ static int serial_imx_probe(struct platform_device *pdev) sport->port.fifosize = 32; sport->port.ops = &imx_pops; sport->port.rs485_config = imx_rs485_config; - sport->port.rs485.flags = - SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX; + sport->port.rs485.flags = SER_RS485_RTS_ON_SEND; sport->port.flags = UPF_BOOT_AUTOCONF; init_timer(&sport->timer); sport->timer.function = imx_timeout; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
