On 06/20/2017 01:39 AM, Andy Shevchenko wrote:
> On Tue, Jun 20, 2017 at 1:26 AM, Hauke Mehrtens <hauke@xxxxxxxxxx> wrote:
>> This driver starts the DWC2 core(s) built into the XWAY SoCs and provides
>> the PHY interfaces for each core. The phy instances can be passed to the
>> dwc2 driver, which already supports the generic phy interface.
>>
>> Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
>> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>> .../bindings/phy/phy-lantiq-rcu-usb2.txt | 41 ++++
>> arch/mips/lantiq/xway/sysctrl.c | 24 +-
>> drivers/phy/Kconfig | 8 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-lantiq-rcu-usb2.c | 272 +++++++++++++++++++++
>> 5 files changed, 334 insertions(+), 12 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt
>> create mode 100644 drivers/phy/phy-lantiq-rcu-usb2.c
>>
....
>> + /*
>> + * Power on the USB PHY. We have to do it early because
>> + * otherwise the second core won't turn on properly.
>> + */
>> + ret = clk_prepare_enable(priv->phy_gate_clk);
>> + if (ret) {
>> + dev_err(dev, "failed to enable PHY gate\n");
>
> Disable and unprepare control clock.
Done, is there no devm_ version of this?
>> + return ret;
>> + }
...
>> + ret = ltq_rcu_usb2_start_cores(priv);
>> + if (ret)
>> + return ret;
>> +
>
>> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +
>> + if (IS_ERR(provider))
>
> Remove line in between.
Done
>> + return PTR_ERR(provider);
>> +
>> + dev_set_drvdata(priv->dev, priv);
>> + return 0;
>
> You need to carefully check error path that you disabled clocks.
Done
>> +}
>> +
.....
Hauke
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
