On Fri, 16 Jun 2017, Fabrice Gasnier wrote: > Add documentation for STMicroelectronics STM32 Low Power Timer binding. > > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx> > --- > .../devicetree/bindings/mfd/stm32-lptimer.txt | 51 ++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/stm32-lptimer.txt > > diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt > new file mode 100644 > index 0000000..237b7d6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt > @@ -0,0 +1,51 @@ > +STMicroelectronics STM32 Low Power Timer > + > +The STM32 Low Power Timer (LPTIM) is a 16-bit timer that provides several > +functionalities: "functions". > +- PWM output (with programmable prescaler, configurable polarity) > +- Quadrature encoder, counter > +- Trigger source for STM32 ADC/DAC (LPTIM_OUT) > + > +Required properties: > +- compatible: Must be "st,stm32-lptimer". > +- reg: Offset and length of the device's register set. > +- clocks: Phandle to the clock used by the LP Timer module. > +- clock-names: Must be "int". These look better when padded: - compatible: Must be "st,stm32-lptimer". - reg: Offset and length of the device's register set. - clocks: Phandle to the clock used by the LP Timer module. - clock-names: Must be "int". > +- #address-cells = <1>; > +- #size-cells = <0>; Please use the same format as you did for the other properties. > +Optional properties: > +- resets: Must contain the phandle to the reset controller. > + > +Optional subnodes: > +- pwm: See ../pwm/pwm-stm32-lp.txt > +- counter: See ../iio/timer/stm32-lptimer-cnt.txt > +- trigger: See ../iio/timer/stm32-lptimer-trigger.txt > + > +Example: > + > + lptimer1: lptimer@0x40002400 { Remove '0x' > + compatible = "st,stm32-lptimer"; > + reg = <0x40002400 0x400>; > + clocks = <&timer_clk>; > + clock-names = "int"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pwm { > + compatible = "st,stm32-pwm-lp"; > + pinctrl-names = "default"; > + pinctrl-0 = <&lppwm1_pins>; > + }; > + > + trigger@0 { Why is this @0 and no reg properties are provided for the other 2 nodes? > + compatible = "st,stm32-lptimer-trigger"; > + reg = <0>; > + }; > + > + counter { > + compatible = "st,stm32-lptimer-counter"; > + pinctrl-names = "default"; > + pinctrl-0 = <&lptim1_in_pins>; > + }; > + }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html