Hi Xiaowei, On 2017/6/19 11:23, Xiaowei Song wrote: Please add some commit message. > Cc: Guodong Xu <guodong.xu@xxxxxxxxxx> > Signed-off-by: Xiaowei Song <songxiaowei@xxxxxxxxxxxxx> > Acked-by: Rob Herring <robh@xxxxxxxxxx> > --- I have picked up the patch from [1] and the pull request has been merged into ARM SoC tree. Please do not resend the same patch. Thanks! [1]:https://lkml.org/lkml/2017/6/14/1055 Best Regards, Wei > .../devicetree/bindings/pci/kirin-pcie.txt | 55 ++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt > > diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt > new file mode 100644 > index 000000000000..c2be01270ec5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt > @@ -0,0 +1,55 @@ > +HiSilicon Kirin SoCs PCIe host DT description > + > +Kirin PCIe host controller is based on Designware PCI core. > +It shares common functions with PCIe Designware core driver > +and inherits common properties defined in > +Documentation/devicetree/bindings/pci/designware-pci.txt. > + > +Additional properties are described here: > + > +Required properties > +- compatible: > + "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC > +- reg: Should contain rc_dbi, apb, phy, config registers location and length. > +- reg-names: Must include the following entries: > + "dbi": controller configuration registers; > + "apb": apb Ctrl register defined by Kirin; > + "phy": apb PHY register defined by Kirin; > + "config": PCIe configuration space registers. > +- reset-gpios: The gpio to generate PCIe perst assert and deassert signal. > + > +Optional properties: > + > +Example based on kirin960: > + > + pcie@f4000000 { > + compatible = "hisilicon,kirin960-pcie"; > + reg = <0x0 0xf4000000 0x0 0x1000>, > + <0x0 0xff3fe000 0x0 0x1000>, > + <0x0 0xf3f20000 0x0 0x40000>, > + <0x0 0xf4000000 0x0 0x2000>; > + reg-names = "dbi","apb","phy", "config"; > + bus-range = <0x0 0x1>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges = <0x02000000 0x0 0x0 > + 0x0 0xf5000000 > + 0x0 0x2000000>; > + num-lanes = <1>; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0xf800 0 0 7>; > + interrupt-map = <0x0 0 0 1 &gic 0 282 4>, > + <0x0 0 0 2 &gic 0 283 4>, > + <0x0 0 0 3 &gic 0 284 4>, > + <0x0 0 0 4 &gic 0 285 4>; > + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, > + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, > + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, > + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, > + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; > + clock-names = "pcie_phy_ref", "pcie_aux", > + "pcie_apb_phy", "pcie_apb_sys", > + "pcie_aclk"; > + reset-gpios = <&gpio11 1 0>; > + }; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
