pbias register controls internal power supply to sd card i/o pads in most OMAPs (OMAP2-5, DRA7). Control bits for selecting voltage level and enabling/disabling are in the same PBIAS register. Signed-off-by: Balaji T K <balajitk@xxxxxx> Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> Acked-by: Mark Brown <broonie@xxxxxxxxxx> --- .../bindings/regulator/pbias-regulator.txt | 27 ++ drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/pbias-regulator.c | 255 ++++++++++++++++++++ 4 files changed, 292 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/pbias-regulator.txt create mode 100644 drivers/regulator/pbias-regulator.c diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt new file mode 100644 index 0000000..32aa26f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt @@ -0,0 +1,27 @@ +PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs. + +Required properties: +- compatible: + - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7. +- reg: pbias register offset from syscon base and size of pbias register. +- syscon : phandle of the system control module +- regulator-name : should be + pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs + pbias_sim_omap3 for OMAP3 SoCs + pbias_mmc_omap4 for OMAP4 SoCs + pbias_mmc_omap5 for OMAP5 and DRA7 SoC + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index ce785f4..741e8fb 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -369,6 +369,15 @@ config REGULATOR_PALMAS on the muxing. This is handled automatically in the driver by reading the mux info from OTP. +config REGULATOR_PBIAS + tristate "PBIAS OMAP regulator driver" + depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON + help + Say y here to support pbias regulator for mmc1:SD card i/o + on OMAP SoCs. + This driver provides support for OMAP pbias modelled + regulators. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 01c597e..16000fa 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o +obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c new file mode 100644 index 0000000..39518e0 --- /dev/null +++ b/drivers/regulator/pbias-regulator.c @@ -0,0 +1,255 @@ +/* + * pbias-regulator.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Balaji T K <balajitk@xxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_device.h> + +struct pbias_reg_info { + u32 enable; + u32 enable_mask; + u32 vmode; + unsigned int enable_time; + char *name; +}; + +struct pbias_regulator_data { + struct regulator_desc desc; + void __iomem *pbias_addr; + unsigned int pbias_reg; + struct regulator_dev *dev; + struct regmap *syscon; + const struct pbias_reg_info *info; + int voltage; +}; + +static int pbias_regulator_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV, unsigned *selector) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(dev); + const struct pbias_reg_info *info = data->info; + int ret, vmode; + + if (min_uV <= 1800000) + vmode = 0; + else if (min_uV > 1800000) + vmode = info->vmode; + + ret = regmap_update_bits(data->syscon, data->pbias_reg, + info->vmode, vmode); + + return ret; +} + +static int pbias_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int value, voltage; + + regmap_read(data->syscon, data->pbias_reg, &value); + value &= info->vmode; + + voltage = value ? 3000000 : 1800000; + + return voltage; +} + +static int pbias_regulator_enable(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int ret; + + ret = regmap_update_bits(data->syscon, data->pbias_reg, + info->enable_mask, info->enable); + + return ret; +} + +static int pbias_regulator_disable(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int ret; + + ret = regmap_update_bits(data->syscon, data->pbias_reg, + info->enable_mask, 0); + return ret; +} + +static int pbias_regulator_is_enable(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int value; + + regmap_read(data->syscon, data->pbias_reg, &value); + + return (value & info->enable_mask) == info->enable_mask; +} + +static struct regulator_ops pbias_regulator_voltage_ops = { + .set_voltage = pbias_regulator_set_voltage, + .get_voltage = pbias_regulator_get_voltage, + .enable = pbias_regulator_enable, + .disable = pbias_regulator_disable, + .is_enabled = pbias_regulator_is_enable, +}; + +static const struct pbias_reg_info pbias_mmc_omap2430 = { + .enable = BIT(1), + .enable_mask = BIT(1), + .vmode = BIT(0), + .enable_time = 100, + .name = "pbias_mmc_omap2430" +}; + +static const struct pbias_reg_info pbias_sim_omap3 = { + .enable = BIT(9), + .enable_mask = BIT(9), + .vmode = BIT(8), + .enable_time = 100, + .name = "pbias_sim_omap3" +}; + +static const struct pbias_reg_info pbias_mmc_omap4 = { + .enable = BIT(26) | BIT(22), + .enable_mask = BIT(26) | BIT(25) | BIT(22), + .vmode = BIT(21), + .enable_time = 100, + .name = "pbias_mmc_omap4" +}; + +static const struct pbias_reg_info pbias_mmc_omap5 = { + .enable = BIT(27) | BIT(26), + .enable_mask = BIT(27) | BIT(25) | BIT(26), + .vmode = BIT(21), + .enable_time = 100, + .name = "pbias_mmc_omap5" +}; + +static struct of_regulator_match pbias_matches[] = { + { .name = "pbias_mmc_omap2430", .driver_data = (void *)&pbias_mmc_omap2430}, + { .name = "pbias_sim_omap3", .driver_data = (void *)&pbias_sim_omap3}, + { .name = "pbias_mmc_omap4", .driver_data = (void *)&pbias_mmc_omap4}, + { .name = "pbias_mmc_omap5", .driver_data = (void *)&pbias_mmc_omap5}, +}; +#define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches) + +static const struct of_device_id pbias_of_match[] = { + { .compatible = "ti,pbias-omap", }, + {}, +}; +MODULE_DEVICE_TABLE(of, pbias_of_match); + +static int pbias_regulator_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pbias_regulator_data *drvdata; + struct resource *res; + struct regulator_config cfg = { }; + struct regmap *syscon; + const struct pbias_reg_info *info; + int ret = 0; + int count, idx, data_idx = 0; + + count = of_regulator_match(&pdev->dev, np, pbias_matches, + PBIAS_NUM_REGS); + if (count < 0) + return count; + + drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data) + * count, GFP_KERNEL); + if (drvdata == NULL) { + dev_err(&pdev->dev, "Failed to allocate device data\n"); + return -ENOMEM; + } + + syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(syscon)) + return PTR_ERR(syscon); + + cfg.dev = &pdev->dev; + + for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) { + if (!pbias_matches[idx].init_data || + !pbias_matches[idx].of_node) + continue; + + info = pbias_matches[idx].driver_data; + if (!info) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + drvdata[data_idx].pbias_reg = res->start; + drvdata[data_idx].syscon = syscon; + drvdata[data_idx].info = info; + drvdata[data_idx].desc.name = info->name; + drvdata[data_idx].desc.owner = THIS_MODULE; + drvdata[data_idx].desc.type = REGULATOR_VOLTAGE; + drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops; + drvdata[data_idx].desc.n_voltages = 2; + drvdata[data_idx].desc.enable_time = info->enable_time; + + cfg.init_data = pbias_matches[idx].init_data; + cfg.driver_data = &drvdata[data_idx]; + cfg.of_node = pbias_matches[idx].of_node; + + drvdata[data_idx].dev = devm_regulator_register(&pdev->dev, + &drvdata[data_idx].desc, &cfg); + if (IS_ERR(drvdata[data_idx].dev)) { + ret = PTR_ERR(drvdata[data_idx].dev); + dev_err(&pdev->dev, + "Failed to register regulator: %d\n", ret); + goto err_regulator; + } + data_idx++; + } + + platform_set_drvdata(pdev, drvdata); + +err_regulator: + return ret; +} + +static struct platform_driver pbias_regulator_driver = { + .probe = pbias_regulator_probe, + .driver = { + .name = "pbias-regulator", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pbias_of_match), + }, +}; + +module_platform_driver(pbias_regulator_driver); + +MODULE_AUTHOR("Balaji T K <balajitk@xxxxxx>"); +MODULE_DESCRIPTION("pbias voltage regulator"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pbias-regulator"); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html