This board, as well as some other boards with i.MX6 and a PMIC, uses a
"MPIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2cb72824e800..da9d0c102a31 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
status = "okay";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -125,6 +129,7 @@
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <16 8>;
+ fsl,pmic-stby-poweroff;
regulators {
reg_vddcore: sw1ab { /* VDDARM_IN */
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
