Re: [PATCH RESEND] i2c: add sc18is600 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Andy,

Thanks for your feedback.

On Sat, Jun 17, 2017 at 09:13:32PM +0300, Andy Shevchenko wrote:
> On Tue, Jun 13, 2017 at 6:47 PM, Sebastian Reichel <sre@xxxxxxxxxx> wrote:
> > This adds an I²C master driver for SPI -> I²C bus bridge chips.
> > It currently supports NXP's SC18IS600 and SC18IS601, as well as
> > Silicon Labs' CP2120. The driver was only tested on SC18IS600.
> 
> > +static void sc18is600_setup_clock_frequency(struct sc18is600dev *dev)
> > +{
> > +       int reg = DIV_ROUND_UP(dev->clock_base, dev->i2c_clock_frequency);
> > +
> 
> > +       if (reg < 5)
> > +               reg = 5;
> > +       if (reg > 255)
> > +               reg = 255;
> 
> clamp_t()

I will use clamp_val()

> [...]
> lot's of suggestions for improvements.
> [...]

Ack.

> ...and better to use s600dev or alike to avoid confusion.
> 
> > +               return -ENOMEM;
> 
> > +       snprintf(dev->adapter.name, sizeof(dev->adapter.name),
> 
> > +                "SC18IS600 at SPI %02d device %02d",
> 
> Isn't too much for adapter name?
> I don't remember if it's part of ABI, in that case it's even worse.

Well, it's displayed by "i2cdetect -l". Here are the names from some
other drivers, which I used as reference:

i2c-tiny-usb at bus %03d device %03d
i2c-diolan-u2c at bus %03d device %03d
OSIF at bus %03d device %03d
SMBus Via Pro adapter at %04x
SMBus SIS5595 adapter at %04x

> [...]
> lot's of suggestions for improvements.
> [...]

Ack.

-- Sebastian

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux