Add support for single PWM channel on Low Power Timer, that can be
found on some STM32 platforms.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
drivers/pwm/Kconfig | 10 +++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-stm32-lp.c | 216 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 227 insertions(+)
create mode 100644 drivers/pwm/pwm-stm32-lp.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 313c107..6ac4477 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -417,6 +417,16 @@ config PWM_STM32
To compile this driver as a module, choose M here: the module
will be called pwm-stm32.
+config PWM_STM32_LP
+ tristate "STMicroelectronics STM32 PWM LP"
+ depends on MFD_STM32_LPTIMER || COMPILE_TEST
+ help
+ Generic PWM framework driver for STMicroelectronics STM32 SoCs
+ with Low Power Timer (LPTIM).
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-stm32-lp.
+
config PWM_STMPE
bool "STMPE expander PWM export"
depends on MFD_STMPE
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 93da1f7..a3a4bee 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_STI) += pwm-sti.o
obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
+obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
obj-$(CONFIG_PWM_STMPE) += pwm-stmpe.o
obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
new file mode 100644
index 0000000..0de1256
--- /dev/null
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -0,0 +1,216 @@
+/*
+ * This file is part of STM32 low-power timer driver
+ *
+ * Copyright (C) STMicroelectronics 2017
+ *
+ * Author: Gerald Baeza <gerald.baeza@xxxxxx>
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Inspired by pwm-stm32.c from Gerald Baeza
+ */
+
+#include <linux/bitfield.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+struct stm32_pwm_lp {
+ struct pwm_chip chip;
+ struct clk *clk;
+ struct regmap *regmap;
+};
+
+static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
+{
+ return container_of(chip, struct stm32_pwm_lp, chip);
+}
+
+static const u8 prescalers[] = {1, 2, 4, 8, 16, 32, 64, 128};
+
+static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
+ unsigned long long prd, div, dty;
+ struct pwm_state cstate;
+ u32 val, mask, cfgr, wavpol, presc = 0;
+ bool reenable = false;
+ int ret;
+
+ pwm_get_state(pwm, &cstate);
+
+ if (!state->enabled) {
+ if (cstate.enabled) {
+ /* Disable LP timer */
+ ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+ if (ret)
+ return ret;
+ clk_disable(priv->clk);
+ }
+ return 0;
+ }
+
+ /* Calculate the period and prescaler value */
+ div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
+ do_div(div, NSEC_PER_SEC);
+ prd = div;
+ while (div > STM32_LPTIM_MAX_ARR) {
+ presc++;
+ if (presc >= ARRAY_SIZE(prescalers)) {
+ dev_err(priv->chip.dev, "max prescaler exceeded\n");
+ return -EINVAL;
+ }
+ div = prd;
+ do_div(div, prescalers[presc]);
+ }
+ prd = div;
+
+ /* Calculate the duty cycle */
+ dty = prd * state->duty_cycle;
+ do_div(dty, state->period);
+
+ wavpol = FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
+
+ if (!cstate.enabled) {
+ ret = clk_enable(priv->clk);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
+ if (ret)
+ goto err;
+
+ if ((wavpol != FIELD_GET(STM32_LPTIM_WAVPOL, cfgr)) ||
+ (presc != FIELD_GET(STM32_LPTIM_PRESC, cfgr))) {
+ val = FIELD_PREP(STM32_LPTIM_PRESC, presc) | wavpol;
+ mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL;
+
+ /* Must disable LP timer to modify CFGR */
+ ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+ if (ret)
+ goto err;
+ reenable = true;
+ ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
+ val);
+ if (ret)
+ goto err;
+ }
+
+ if (!cstate.enabled || reenable) {
+ /* Must enable LP timer to modify CMP & ARR */
+ ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
+ STM32_LPTIM_ENABLE);
+ if (ret)
+ goto err;
+ }
+
+ ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
+ if (ret)
+ goto err;
+
+ ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
+ if (ret)
+ goto err;
+
+ /* ensure CMP & ARR registers are properly written */
+ ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
+ (val & STM32_LPTIM_CMPOK_ARROK),
+ 100, 1000);
+ if (ret) {
+ dev_err(priv->chip.dev, "ARR/CMP registers write issue\n");
+ goto err;
+ }
+ ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
+ STM32_LPTIM_CMPOKCF_ARROKCF);
+ if (ret)
+ goto err;
+
+ if (!cstate.enabled || reenable) {
+ /* Start LP timer in continuous mode */
+ ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
+ STM32_LPTIM_CNTSTRT,
+ STM32_LPTIM_CNTSTRT);
+ if (ret) {
+ regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+ goto err;
+ }
+ }
+
+ return 0;
+err:
+ if (!cstate.enabled)
+ clk_disable(priv->clk);
+
+ return ret;
+}
+
+static const struct pwm_ops stm32_pwm_lp_ops = {
+ .owner = THIS_MODULE,
+ .apply = stm32_pwm_lp_apply,
+};
+
+static int stm32_pwm_lp_probe(struct platform_device *pdev)
+{
+ struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+ struct stm32_pwm_lp *priv;
+ int ret;
+
+ if (IS_ERR_OR_NULL(ddata))
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->regmap = ddata->regmap;
+ priv->clk = ddata->clk;
+ if (!priv->regmap || !priv->clk)
+ return -EINVAL;
+
+ priv->chip.base = -1;
+ priv->chip.dev = &pdev->dev;
+ priv->chip.ops = &stm32_pwm_lp_ops;
+ priv->chip.npwm = 1;
+
+ ret = pwmchip_add(&priv->chip);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int stm32_pwm_lp_remove(struct platform_device *pdev)
+{
+ struct stm32_pwm_lp *priv = platform_get_drvdata(pdev);
+
+ if (pwm_is_enabled(priv->chip.pwms))
+ pwm_disable(priv->chip.pwms);
+
+ return pwmchip_remove(&priv->chip);
+}
+
+static const struct of_device_id stm32_pwm_lp_of_match[] = {
+ { .compatible = "st,stm32-pwm-lp", },
+ { /* end node */ },
+};
+MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);
+
+static struct platform_driver stm32_pwm_lp_driver = {
+ .probe = stm32_pwm_lp_probe,
+ .remove = stm32_pwm_lp_remove,
+ .driver = {
+ .name = "stm32-pwm-lp",
+ .of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
+ },
+};
+module_platform_driver(stm32_pwm_lp_driver);
+
+MODULE_ALIAS("platform:stm32-pwm-lp");
+MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
