On Friday 09 June 2017 01:34 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>
> As explained in the commit 9200c6f177638 ("Revert "phy: Add USB3 PHY support
> for Broadcom NSP SoC"") this module should be modified to use MDIO bus as
> this is how PHY is really attached.
>
> This should allow reusing this driver on NSP and any other platform with
> MDIO bus and this particular PHY.
>
> V2: Rebase and update 4/5 and 5/5.
merged, thanks!
-Kishon
>
> Rafał Miłecki (5):
> phy: bcm-ns-usb3: always wait for idle after writing to the PHY reg
> phy: bcm-ns-usb3: use pointer for PHY writing function
> phy: bcm-ns-usb3: enable MDIO in the platform specific code
> dt-bindings: phy: Modify Broadcom NS USB 3.0 PHY binding to use MDIO
> phy: bcm-ns-usb3: add MDIO driver using proper bus layer
>
> .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 27 ++-
> drivers/phy/broadcom/Kconfig | 1 +
> drivers/phy/broadcom/phy-bcm-ns-usb3.c | 230 +++++++++++++++------
> 3 files changed, 186 insertions(+), 72 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
