On 14/06/17 18:11, sean.wang@xxxxxxxxxxxx wrote:
From: Sean Wang <sean.wang@xxxxxxxxxxxx>
add basic nodes into the mt7622.dtsi for the system
bring-up which includes ARM CPU, GIC, timer, MediaTek
UART, SYSIRQ and one reserved memory region for ATF.
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 104 +++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7622.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
new file mode 100644
index 0000000..239b9b3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@xxxxxxxxxxxx>
+ * Sean Wang <sean.wang@xxxxxxxxxxxx>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt7622";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ clock-frequency = <1300000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clock-frequency = <1300000000>;
+ };
+ };
+
+ uart_clk: dummy25m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@43000000 {
+ reg = <0 0x43000000 0 0x30000>;
+ no-map;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ sysirq: interrupt-controller@10200620 {
+ compatible = "mediatek,mt7622-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200620 0 0x20>;
+ };
+
+ gic: interrupt-controller@10300000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10310000 0 0x1000>,
+ <0 0x10320000 0 0x1000>,
+ <0 0x10340000 0 0x2000>,
+ <0 0x10360000 0 0x2000>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>, <&uart_clk>;
Please add a dummy clock node with the correct frequency, as done in
other chips as well.
Thanks,
Matthias
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
