[PATCHv4] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The following devices/functionalities were added:
 * Main and secondary UARTs.
 * i2c and the pcf8563 device.
 * Ethernet.
 * NAND.
 * The BP1 button.
 * The LED.
 * Watchdog.
 * SD.
 * USB host.
 * USB otg(device and host).

Cc: Eric Bénard <eric@xxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
---
ChangeLog v3->v4:
- Reordered the Cc list and dropped the Cc to the devicetree binding maintainers.
- Added USB otg support.
- Cosmetic cleanups in the iomuxc node, the esdhc1 node was updated accordingly.

ChangeLog v2->v3:
- Removed the useless regulator-always-on
- Added the rts and cts pins to the uart1 pinctrl

ChangeLog v1->v2:
- Added the board target in arch/arm/boot/dts/Makefile
- Fixed the gpios to now use the gpios defines.
- Fixed the button linux code to now use an input define.
- Fixed the regulator.
---
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi       |   85 +++++++++++++++
 .../boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts  |  113 ++++++++++++++++++++
 3 files changed, 199 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
 create mode 100644 arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 059d280..b3165b6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -149,6 +149,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx51-babbage.dtb \
 	imx51-eukrea-mbimxsd51-baseboard.dtb \
 	imx53-ard.dtb \
+	imx53-eukrea-mbimxsd53-baseboard.dts \
 	imx53-evk.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
diff --git a/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
new file mode 100644
index 0000000..efb287a
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX53";
+	compatible = "eukrea,cpuimx53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x20000000>; /* 512M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-eukrea {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <MX53_FEC_PINGRP1>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <MX53_I2C1_PINGRP1>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <MX53_NAND_PINGRP1>;
+
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&usbh1 {
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
new file mode 100644
index 0000000..dea2172
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "imx53-eukrea-cpuimx53.dtsi"
+
+/ {
+	model = "Eukrea MBIMX53SD";
+	compatible = "eukrea,mbimxsd53","eukrea,cpuimx53", "fsl,imx53";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			reg = <0>;
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx53-eukrea {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_ESDHC1_PINGRP1
+				MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000 /* CD */
+			>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_UART1_PINGRP2
+				MX53_UART1_PINGRP3
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <MX53_UART2_PINGRP2>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux