The cros_ec requires CS line to be active after last message. But the CS
would be toggled when powering off/on rockchip spi, which breaks ec xfer.
Use GPIO CS to prevent that.
Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
---
Changes in v3: None
Changes in v2:
Fix wrong pinconf for spi5_cs0.
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index eb50593..b34a51d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -790,6 +790,8 @@ ap_i2c_audio: &i2c8 {
&spi5 {
status = "okay";
+ cs-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+
cros_ec: ec@0 {
compatible = "google,cros-ec-spi";
reg = <0>;
@@ -813,6 +815,10 @@ ap_i2c_audio: &i2c8 {
};
};
+&spi5_cs0 {
+ rockchip,pins = <RK_GPIO2 23 RK_FUNC_GPIO &pcfg_output_high>;
+};
+
&tsadc {
status = "okay";
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
