Hi Al, [auto build test ERROR on phy/next] [also build test ERROR on next-20170613] [cannot apply to linus/master v4.12-rc5] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Al-Cooper/Add-Broadcom-STB-USB-phy-driver/20170614-070044 base: https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git next config: blackfin-allmodconfig (attached as .config) compiler: bfin-uclinux-gcc (GCC) 6.2.0 reproduce: wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=blackfin All error/warnings (new ones prefixed by >>): drivers/phy//broadcom/phy-brcm-usb-init.c: In function 'brcmusb_usb_phy_ldo_fix': >> drivers/phy//broadcom/phy-brcm-usb-init.c:139:49: error: 'USB_CTRL_0xFFC00000' undeclared (first use in this function) #define USB_CTRL_REG(base, reg) ((void *)base + USB_CTRL_##reg) ^ >> drivers/phy//broadcom/phy-brcm-usb-init.c:157:31: note: in expansion of macro 'USB_CTRL_REG' brcmusb_writel(brcmusb_readl(USB_CTRL_REG(base, reg)) & \ ^~~~~~~~~~~~ >> drivers/phy//broadcom/phy-brcm-usb-init.c:569:2: note: in expansion of macro 'USB_CTRL_UNSET' USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB); ^~~~~~~~~~~~~~ drivers/phy//broadcom/phy-brcm-usb-init.c:139:49: note: each undeclared identifier is reported only once for each function it appears in #define USB_CTRL_REG(base, reg) ((void *)base + USB_CTRL_##reg) ^ >> drivers/phy//broadcom/phy-brcm-usb-init.c:157:31: note: in expansion of macro 'USB_CTRL_REG' brcmusb_writel(brcmusb_readl(USB_CTRL_REG(base, reg)) & \ ^~~~~~~~~~~~ >> drivers/phy//broadcom/phy-brcm-usb-init.c:569:2: note: in expansion of macro 'USB_CTRL_UNSET' USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB); ^~~~~~~~~~~~~~ drivers/phy//broadcom/phy-brcm-usb-init.c: In function 'brcmusb_init_common': >> drivers/phy//broadcom/phy-brcm-usb-init.c:139:49: error: 'USB_CTRL_0xFFC00000' undeclared (first use in this function) #define USB_CTRL_REG(base, reg) ((void *)base + USB_CTRL_##reg) ^ drivers/phy//broadcom/phy-brcm-usb-init.c:154:31: note: in expansion of macro 'USB_CTRL_REG' brcmusb_writel(brcmusb_readl(USB_CTRL_REG(base, reg)) | \ ^~~~~~~~~~~~ >> drivers/phy//broadcom/phy-brcm-usb-init.c:962:2: note: in expansion of macro 'USB_CTRL_SET' USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); ^~~~~~~~~~~~ drivers/phy//broadcom/phy-brcm-usb-init.c: In function 'brcmusb_init_common_mips': >> drivers/phy//broadcom/phy-brcm-usb-init.c:139:49: error: 'USB_CTRL_0xFFC00000' undeclared (first use in this function) #define USB_CTRL_REG(base, reg) ((void *)base + USB_CTRL_##reg) ^ drivers/phy//broadcom/phy-brcm-usb-init.c:154:31: note: in expansion of macro 'USB_CTRL_REG' brcmusb_writel(brcmusb_readl(USB_CTRL_REG(base, reg)) | \ ^~~~~~~~~~~~ drivers/phy//broadcom/phy-brcm-usb-init.c:1097:2: note: in expansion of macro 'USB_CTRL_SET' USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); ^~~~~~~~~~~~ vim +/USB_CTRL_REG +157 drivers/phy//broadcom/phy-brcm-usb-init.c 133 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR, 134 USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR, 135 USB_CTRL_SETUP_ENDIAN_SELECTOR, 136 USB_CTRL_SELECTOR_COUNT, 137 }; 138 > 139 #define USB_CTRL_REG(base, reg) ((void *)base + USB_CTRL_##reg) 140 #define USB_XHCI_EC_REG(base, reg) ((void *)base + USB_XHCI_EC_##reg) 141 #define USB_CTRL_MASK(reg, field) \ 142 USB_CTRL_##reg##_##field##_MASK 143 #define USB_CTRL_MASK_FAMILY(params, reg, field) \ 144 (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) 145 146 #define USB_CTRL_SET_FAMILY(params, reg, field) \ 147 usb_ctrl_set_family(params, USB_CTRL_##reg, \ 148 USB_CTRL_##reg##_##field##_SELECTOR) 149 #define USB_CTRL_UNSET_FAMILY(params, reg, field) \ 150 usb_ctrl_unset_family(params, USB_CTRL_##reg, \ 151 USB_CTRL_##reg##_##field##_SELECTOR) 152 153 #define USB_CTRL_SET(base, reg, field) \ 154 brcmusb_writel(brcmusb_readl(USB_CTRL_REG(base, reg)) | \ 155 USB_CTRL_##reg##_##field##_MASK, USB_CTRL_REG(base, reg)) 156 #define USB_CTRL_UNSET(base, reg, field) \ > 157 brcmusb_writel(brcmusb_readl(USB_CTRL_REG(base, reg)) & \ 158 ~USB_CTRL_##reg##_##field##_MASK, USB_CTRL_REG(base, reg)) 159 160 --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
Attachment:
.config.gz
Description: application/gzip