The MDIO reset GPIO is really a classical optional GPIO property case,
so devm_gpiod_get_optional() should have been used, not devm_gpiod_get().
Doing this saves several LoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/mdio_bus.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
Index: net-next/drivers/net/phy/mdio_bus.c
===================================================================
--- net-next.orig/drivers/net/phy/mdio_bus.c
+++ net-next/drivers/net/phy/mdio_bus.c
@@ -354,16 +354,12 @@ int __mdiobus_register(struct mii_bus *b
mutex_init(&bus->mdio_lock);
/* de-assert bus level PHY GPIO reset */
- gpiod = devm_gpiod_get(&bus->dev, "reset", GPIOD_OUT_LOW);
+ gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpiod)) {
- err = PTR_ERR(gpiod);
- if (err != -ENOENT) {
- dev_err(&bus->dev,
- "mii_bus %s couldn't get reset GPIO\n",
- bus->id);
- return err;
- }
- } else {
+ dev_err(&bus->dev, "mii_bus %s couldn't get reset GPIO\n",
+ bus->id);
+ return PTR_ERR(gpiod);
+ } else if (gpiod) {
bus->reset_gpiod = gpiod;
gpiod_set_value_cansleep(gpiod, 1);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
