2017-06-09 19:54 GMT+02:00 Hans Verkuil <hverkuil@xxxxxxxxx>: > From: Hans Verkuil <hans.verkuil@xxxxxxxxx> > > Now that there is a cec.txt with common CEC bindings, update the two > driver-specific bindings to refer to cec.txt. > > Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> > Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx> > Cc: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > --- > Documentation/devicetree/bindings/media/s5p-cec.txt | 6 ++---- > Documentation/devicetree/bindings/media/stih-cec.txt | 2 +- > 2 files changed, 3 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt > index 261af4d1a791..1b1a10ba48ce 100644 > --- a/Documentation/devicetree/bindings/media/s5p-cec.txt > +++ b/Documentation/devicetree/bindings/media/s5p-cec.txt > @@ -15,13 +15,11 @@ Required properties: > - clock-names : from common clock binding: must contain "hdmicec", > corresponding to entry in the clocks property. > - samsung,syscon-phandle - phandle to the PMU system controller > - - hdmi-phandle - phandle to the HDMI controller > + - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. > > Optional: > - needs-hpd : if present the CEC support is only available when the HPD > - is high. Some boards only let the CEC pin through if the HPD is high, for > - example if there is a level converter that uses the HPD to power up > - or down. > + is high. See cec.txt for more details. > > Example: > > diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt > index 289a08b33651..8be2a040c6c6 100644 > --- a/Documentation/devicetree/bindings/media/stih-cec.txt > +++ b/Documentation/devicetree/bindings/media/stih-cec.txt > @@ -9,7 +9,7 @@ Required properties: > - pinctrl-names: Contains only one value - "default" > - pinctrl-0: Specifies the pin control groups used for CEC hardware. > - resets: Reference to a reset controller > - - hdmi-phandle: Phandle to the HDMI controller > + - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt. > > Example for STIH407: > > -- > 2.11.0 > Acked-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html