Re: [PATCH v4] mfd: lp87565: Add lp87565 PMIC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Monday 12 June 2017 02:57 PM, Javier Martinez Canillas wrote:
> Hello Lee and Keerthy,
> 
> On Mon, Jun 12, 2017 at 11:17 AM, Keerthy <j-keerthy@xxxxxx> wrote:
>>
>>
>> On Monday 12 June 2017 02:41 PM, Lee Jones wrote:
>>> On Sun, 11 Jun 2017, Keerthy wrote:
>>>
>>>>
>>>>
>>>> On Sunday 11 June 2017 10:36 AM, Keerthy wrote:
>>>>>
>>>>>
>>>>> On Friday 09 June 2017 07:58 PM, Rob Herring wrote:
>>>>>> On Thu, Jun 08, 2017 at 09:38:14AM +0530, Keerthy wrote:
>>>>>>> The LP87565 chip is a power management IC for Portable Navigation Systems
>>>>>>> and Tablet Computing devices. It contains the following components:
>>>>>>>
>>>>>>>         - Configurable Bucks(Single and multi-phase).
>>>>>>>         - Configurable General Purpose Output Signals (GPO).
>>>>>>>
>>>>>>> The LP87565-Q1 variant device uses two 2-phase outputs configuration,
>>>>>>> Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3
>>>>>>> output.
>>>>>>>
>>>>
>>>> Lee Jones,
>>>>
>>>> Shall i add back i2c_device_id as pointed here:
>>>> http://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1417316.html
>>>
>>> Hasn't that been fixed yet?
>>>
> 
> There are only 2 patch series remaining to be merged so we can finally
> fix this in the I2C core, making sure that no drivers will be
> regressed. One of the series is for MFD and have been around for a
> while (it already contains all the relevant acks AFAICT), it would be
> very helpful if you can look at it and merge if you think is correct:
> 
> https://lkml.org/lkml/2017/5/4/11
> 
>>> I guess so then. :(
>>
>> Okay. So with that i assume i should reintroduce probe instead of probe_new.
>>
> 
> It's orthogonal, you can have probe_new and also the I2C device ID
> table (the OF table will be used for matching, you just need the I2C
> table to export the aliases with MODULE_DEVICE_TABLE(i2c,.. ).

I believe the whole purpose of comments on probe_new was to remove the
i2c device ID. With that needed i will stick to probe for now and once
the above series mentioned by you gets in and all the dependencies for
probe_new are cleared i will send out a separate patch.

> 
> Best regards,
> Javier
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux