On Fri, 2017-06-09 at 11:49 +0200, Neil Armstrong wrote: > Switch to the stable UART bindings by adding a XTAL node and using the > proper compatible strings. > > Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Shouldn't this patch be squashed with patch 4 ? > --- > arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi > index b0fc91f..a334fbe 100644 > --- a/arch/arm/boot/dts/meson6.dtsi > +++ b/arch/arm/boot/dts/meson6.dtsi > @@ -70,9 +70,37 @@ > }; > }; > > + xtal: xtal-clk { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + clock-output-names = "xtal"; > + #clock-cells = <0>; > + }; > + > clk81: clk@0 { > #clock-cells = <0>; > compatible = "fixed-clock"; > clock-frequency = <200000000>; > }; > }; /* end of / */ > + > + > +&uart_AO { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +}; > + > +&uart_A { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +}; > + > +&uart_B { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +}; > + > +&uart_C { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html