On 9 June 2017 at 10:41, Kishon Vijay Abraham I <kishon@xxxxxx> wrote: > commit 94647a30124e2c7 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") > while enabling WiFi/BT combo added regulator to trigger the nReset > signal of the Bluetooth module in vqmmc-supply. However BT should be > handled by UART. Moreover "vqmmc" is not a defined binding for > omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, > mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" > binding. > > Remove "vqmmc-supply" property in mmc2 here. > > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Thanks, applied for next! Kind regards Uffe > --- > arch/arm/boot/dts/omap3-overo-base.dtsi | 11 ----------- > 1 file changed, 11 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi > index 401fae838fe9..cd220342a805 100644 > --- a/arch/arm/boot/dts/omap3-overo-base.dtsi > +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi > @@ -74,16 +74,6 @@ > gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */ > startup-delay-us = <10000>; > }; > - > - /* Regulator to trigger the nReset signal of the Bluetooth module */ > - w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset { > - compatible = "regulator-fixed"; > - regulator-name = "regulator-w3cbw003c-bt-nreset"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */ > - startup-delay-us = <10000>; > - }; > }; > > &omap3_pmx_core { > @@ -191,7 +181,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins>; > vmmc-supply = <&w3cbw003c_npoweron>; > - vqmmc-supply = <&w3cbw003c_bt_nreset>; > vmmc_aux-supply = <&w3cbw003c_wifi_nreset>; > bus-width = <4>; > cap-sdio-irq; > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html