Re: [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Jun 09, 2017 at 11:34:36PM +0800, Chen-Yu Tsai wrote:
> The Orange Pi Plus 2E, unlike the Orange Pi PC and PC Plus which its
> schematics are based on, uses an external Realtek RTL8211E PHY in
> RGMII mode, with a GPIO enabling the regulator for I/O signalling
> power supplies. The PHY's main power supply is enabled by the main
> 5V power supply.
> 
> Add the regulator and PHY nodes, and override the PHY phandle under
> the EMAC node, so that the EMAC works properly on this board.
> 
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux