The Renesas Salvator-XS (Salvator-X 2nd version) development board can be equipped with either an R-Car H3 ES2.0 or M3-W ES1.x SiP, which are pin-compatible. Add initial support for the common parts of the Salvator-XS board into its own .dtsi file, to be included by the DTSes for the H3/M3-W versions. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- arch/arm64/boot/dts/renesas/salvator-xs.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/salvator-xs.dtsi diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi new file mode 100644 index 0000000000000000..81227e3c2c6f1e2d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for the Salvator-X 2nd version board + * + * Copyright (C) 2015-2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "salvator-common.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board"; + compatible = "renesas,salvator-xs"; +}; + +&extal_clk { + clock-frequency = <16640000>; +}; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html