Switch to the stable UART bindings by adding a XTAL node and using the
proper compatible strings.
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
arch/arm/boot/dts/meson8.dtsi | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 6993077..a2ea112 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -83,6 +83,13 @@
};
};
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
clk81: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -199,17 +206,25 @@
};
&uart_AO {
- clocks = <&clk81>;
+ compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_A {
- clocks = <&clk81>;
+ compatible = "amlogic,meson8-uart";
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_B {
- clocks = <&clk81>;
+ compatible = "amlogic,meson8-uart";
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_C {
- clocks = <&clk81>;
+ compatible = "amlogic,meson8-uart";
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
