Re: [PATCH 0/2] Add bcm2835aux interrupt controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Phil,

> Phil Elwell <phil@xxxxxxxxxxxxxxx> hat am 7. Juni 2017 um 13:11 geschrieben:
> 
> 
> Devices in the AUX block share a common interrupt line, with a register
> indicating which devices have active IRQs. Expose this as a nested
> interrupt controller to avoid IRQ sharing problems (easily observed if
> UART1 and SPI1/2 are enabled simultaneously).
> 
> The interrupt functionality could arguably be forked off as a separate
> irqchip driver, but the clock driver has already claimed the AUX_IRQ
> register so some driver and DT surgery would still be required.
> Eric Anholt thought that including it here is reasonable, but I'm
> prepared to split it out if this is considered too hacky.

in order to give the maintainers (e.g. irqchip) a chance, they should be included into CC.

> 
> Phil Elwell (2):
>   clk: bcm2835: Add AUX interrupt controller

Either way the dt-binding must be updated as a separate patch. So Rob can review it.

Thanks for submitting this upstream.

Stefan

>   ARM: dts: bcm283x: Enable AUX interrupt controller
> 
>  arch/arm/boot/dts/bcm283x.dtsi    |  12 +++-
>  drivers/clk/bcm/clk-bcm2835-aux.c | 120 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 129 insertions(+), 3 deletions(-)
> 
> -- 
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux