In the devicetree, it is possible to specify the baudrate, parity,
bits, flow of the early console, by passing a configuration string like
this:
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:57600n8";
};
This, for instance, will configure the early console for a baudrate of
57600 bps, no parity, and 8 bits per baud.
This patches implements parsing of this configuration string in the
8250_ingenic driver, which previously just ignored it.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_ingenic.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index b31b2ca552d1..59f3e632df49 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -99,14 +99,24 @@ static int __init ingenic_early_console_setup(struct earlycon_device *dev,
const char *opt)
{
struct uart_port *port = &dev->port;
- unsigned int baud, divisor;
+ unsigned int divisor;
+ int baud = 115200;
if (!dev->port.membase)
return -ENODEV;
+ if (opt) {
+ char options[256];
+ unsigned int parity, bits, flow; /* unused for now */
+
+ strlcpy(options, opt, sizeof(options));
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ }
+
ingenic_early_console_setup_clock(dev);
- baud = dev->baud ?: 115200;
+ if (dev->baud)
+ baud = dev->baud;
divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
early_out(port, UART_IER, 0);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
