The patch regulator: hi6421v530: add driver for hi6421v530 voltage regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 5c7024ae7e6787541dd737ba1eba828d5fc74d58 Mon Sep 17 00:00:00 2001 From: Wang Xiaoyin <hw.wangxiaoyin@xxxxxxxxxxxxx> Date: Wed, 7 Jun 2017 15:06:03 +0800 Subject: [PATCH] regulator: hi6421v530: add driver for hi6421v530 voltage regulator add the driver for hi6421v530 voltage regulator Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@xxxxxxxxxxxxx> Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/Kconfig | 10 ++ drivers/regulator/Makefile | 1 + drivers/regulator/hi6421v530-regulator.c | 207 +++++++++++++++++++++++++++++++ 3 files changed, 218 insertions(+) create mode 100644 drivers/regulator/hi6421v530-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 48db87d6dfef..78cd8d84a2cb 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -296,6 +296,16 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_HI6421V530 + tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" + depends on MFD_HI6421_PMIC && OF + help + This driver provides support for the voltage regulators on + HiSilicon Hi6421v530 PMU / Codec IC. + Hi6421v530 is a multi-function device which, on regulator part, + provides 5 general purpose LDOs, and all of them come with support + to either ECO (idle) or sleep mode. + config REGULATOR_HI655X tristate "Hisilicon HI655X PMIC regulators support" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index dc3503fb3e30..36e2b750b188 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o +obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o diff --git a/drivers/regulator/hi6421v530-regulator.c b/drivers/regulator/hi6421v530-regulator.c new file mode 100644 index 000000000000..46bbba96307f --- /dev/null +++ b/drivers/regulator/hi6421v530-regulator.c @@ -0,0 +1,207 @@ +/* + * Device driver for regulators in Hi6421V530 IC + * + * Copyright (c) <2017> HiSilicon Technologies Co., Ltd. + * http://www.hisilicon.com + * Copyright (c) <2017> Linaro Ltd. + * http://www.linaro.org + * + * Author: Wang Xiaoyin <hw.wangxiaoyin@xxxxxxxxxxxxx> + * Guodong Xu <guodong.xu@xxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mfd/hi6421-pmic.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> + +/* + * struct hi6421v530_regulator_info - hi6421v530 regulator information + * @desc: regulator description + * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep + * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only + */ +struct hi6421v530_regulator_info { + struct regulator_desc rdesc; + u8 mode_mask; + u32 eco_microamp; +}; + +/* HI6421v530 regulators */ +enum hi6421v530_regulator_id { + HI6421V530_LDO3, + HI6421V530_LDO9, + HI6421V530_LDO11, + HI6421V530_LDO15, + HI6421V530_LDO16, +}; + +static const unsigned int ldo_3_voltages[] = { + 1800000, 1825000, 1850000, 1875000, + 1900000, 1925000, 1950000, 1975000, + 2000000, 2025000, 2050000, 2075000, + 2100000, 2125000, 2150000, 2200000, +}; + +static const unsigned int ldo_9_11_voltages[] = { + 1750000, 1800000, 1825000, 2800000, + 2850000, 2950000, 3000000, 3300000, +}; + +static const unsigned int ldo_15_16_voltages[] = { + 1750000, 1800000, 2400000, 2600000, + 2700000, 2850000, 2950000, 3000000, +}; + +static const struct regulator_ops hi6421v530_ldo_ops; + +#define HI6421V530_LDO_ENABLE_TIME (350) + +/* + * _id - LDO id name string + * v_table - voltage table + * vreg - voltage select register + * vmask - voltage select mask + * ereg - enable register + * emask - enable mask + * odelay - off/on delay time in uS + * ecomask - eco mode mask + * ecoamp - eco mode load uppler limit in uA + */ +#define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask, \ + odelay, ecomask, ecoamp) { \ + .rdesc = { \ + .name = #_ID, \ + .of_match = of_match_ptr(#_ID), \ + .regulators_node = of_match_ptr("regulators"), \ + .ops = &hi6421v530_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = HI6421V530_##_ID, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(v_table), \ + .volt_table = v_table, \ + .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ + .enable_mask = emask, \ + .enable_time = HI6421V530_LDO_ENABLE_TIME, \ + .off_on_delay = odelay, \ + }, \ + .mode_mask = ecomask, \ + .eco_microamp = ecoamp, \ +} + +/* HI6421V530 regulator information */ + +static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = { + HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2, + 20000, 0x6, 8000), + HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2, + 40000, 0x6, 8000), + HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2, + 40000, 0x6, 8000), + HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2, + 40000, 0x6, 8000), + HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2, + 40000, 0x6, 8000), +}; + +static unsigned int hi6421v530_regulator_ldo_get_mode( + struct regulator_dev *rdev) +{ + struct hi6421v530_regulator_info *info; + unsigned int reg_val; + + info = rdev_get_drvdata(rdev); + regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); + + if (reg_val & (info->mode_mask)) + return REGULATOR_MODE_IDLE; + + return REGULATOR_MODE_NORMAL; +} + +static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct hi6421v530_regulator_info *info; + unsigned int new_mode; + + info = rdev_get_drvdata(rdev); + switch (mode) { + case REGULATOR_MODE_NORMAL: + new_mode = 0; + break; + case REGULATOR_MODE_IDLE: + new_mode = info->mode_mask; + break; + default: + return -EINVAL; + } + + regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + info->mode_mask, new_mode); + + return 0; +} + + +static const struct regulator_ops hi6421v530_ldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_mode = hi6421v530_regulator_ldo_get_mode, + .set_mode = hi6421v530_regulator_ldo_set_mode, +}; + +static int hi6421v530_regulator_probe(struct platform_device *pdev) +{ + struct hi6421_pmic *pmic; + struct regulator_dev *rdev; + struct regulator_config config = { }; + unsigned int i; + + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) { + dev_err(&pdev->dev, "no pmic in the regulator parent node\n"); + return -ENODEV; + } + + for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) { + config.dev = pdev->dev.parent; + config.regmap = pmic->regmap; + config.driver_data = &hi6421v530_regulator_info[i]; + + rdev = devm_regulator_register(&pdev->dev, + &hi6421v530_regulator_info[i].rdesc, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + hi6421v530_regulator_info[i].rdesc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static struct platform_driver hi6421v530_regulator_driver = { + .driver = { + .name = "hi6421v530-regulator", + }, + .probe = hi6421v530_regulator_probe, +}; +module_platform_driver(hi6421v530_regulator_driver); + +MODULE_AUTHOR("Wang Xiaoyin <hw.wangxiaoyin@xxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Hi6421v530 regulator driver"); +MODULE_LICENSE("GPL v2"); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
