[RFC PATCH 5/8] firmware: arm_scmi: add initial support for clock protocol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The clock protocol is intended for management of clocks. It is used to
enable or disable clocks, and to set and get the clock rates. This
protocol provides commands to describe the protocol version, discover
various implementation specific attributes, describe a clock, enable
and disable a clock and get/set the rate of the clock synchronously or
asynchronously.

This patch adds initial support for the clock protocol.

Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx>
---
 drivers/firmware/arm_scmi/Makefile |   2 +-
 drivers/firmware/arm_scmi/clock.c  | 340 +++++++++++++++++++++++++++++++++++++
 drivers/firmware/arm_scmi/common.h |   1 +
 include/linux/scmi_protocol.h      |  18 ++
 4 files changed, 360 insertions(+), 1 deletion(-)
 create mode 100644 drivers/firmware/arm_scmi/clock.c

diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 159de726ee45..6836b1f38f7f 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_ARM_SCMI_PROTOCOL)	= arm_scmi.o
-arm_scmi-y = base.o driver.o perf.o
+arm_scmi-y = base.o clock.o driver.o perf.o
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
new file mode 100644
index 000000000000..e02827a48ab7
--- /dev/null
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -0,0 +1,340 @@
+/*
+ * System Control and Management Interface (SCMI) Clock Protocol
+ *
+ * Copyright (C) 2017 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "common.h"
+
+enum scmi_clock_protocol_cmd {
+	CLOCK_ATTRIBUTES = 0x3,
+	CLOCK_DESCRIBE_RATES = 0x4,
+	CLOCK_RATE_SET = 0x5,
+	CLOCK_RATE_GET = 0x6,
+	CLOCK_CONFIG_SET = 0x7,
+};
+
+struct scmi_msg_resp_clock_protocol_attributes {
+	__le16 num_clocks;
+	    u8 max_async_req;
+	    u8 reserved;
+} __packed;
+
+struct scmi_msg_resp_clock_attributes {
+	__le32 attributes;
+#define	CLOCK_ENABLE	BIT(0)
+	    u8 name[SCMI_MAX_STR_SIZE];
+} __packed;
+
+struct scmi_clock_set_config {
+	__le32 id;
+	__le32 attributes;
+} __packed;
+
+struct scmi_msg_clock_describe_rates {
+	__le32 id;
+	__le32 rate_index;
+} __packed;
+
+struct scmi_msg_resp_clock_describe_rates {
+	__le16 num_returned;
+#define NUM_RETURNED_MASK	(0xfff)
+#define RATE_DISCRETE(x)	((x) & BIT(12))
+	__le16 num_remaining;
+	struct {
+		__le32 value_low;
+		__le32 value_high;
+	} rate[0];
+#define RATE_TO_U64(X)		\
+({				\
+	typeof(X) x = (X);	\
+	le32_to_cpu((x).value_low) | (u64)le32_to_cpu((x).value_high) >> 32; \
+})
+} __packed;
+
+struct scmi_clock_set_rate {
+	__le32 flags;
+#define CLOCK_SET_ASYSC		BIT(0)
+#define CLOCK_SET_DELAYED	BIT(1)
+#define CLOCK_ROUND_UP		BIT(2)
+#define CLOCK_ROUND_AUTO	BIT(3)
+	__le32 id;
+	__le32 value_low;
+	__le32 value_high;
+} __packed;
+
+struct clock_info {
+	u32 attributes;
+	char name[SCMI_MAX_STR_SIZE];
+	union {
+		int num_rates;
+		u64 rates[MAX_NUM_RATES];
+		struct {
+			u64 min_rate;
+			u64 max_rate;
+			u64 step_size;
+		} range;
+	};
+};
+
+struct scmi_clock_info {
+	int num_clocks;
+	int max_async_req;
+	struct clock_info *clk;
+};
+
+static struct scmi_clock_info clocks;
+
+static int scmi_clock_protocol_attributes_get(struct scmi_handle *handle,
+					      struct scmi_clock_info *clocks)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_clock_protocol_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_CLOCK, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = (struct scmi_msg_resp_clock_protocol_attributes *)t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		clocks->num_clocks = le16_to_cpu(attr->num_clocks);
+		clocks->max_async_req = attr->max_async_req;
+	}
+
+	scmi_put_one_xfer(handle, t);
+	return ret;
+}
+
+static int scmi_clock_attributes_get(struct scmi_handle *handle, u32 clk_id,
+				     struct clock_info *clk)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_clock_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_ATTRIBUTES, SCMI_PROTOCOL_CLOCK,
+				 sizeof(clk_id), sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
+	attr = (struct scmi_msg_resp_clock_attributes *)t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		clk->attributes = le32_to_cpu(attr->attributes);
+		memcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+	}
+
+	scmi_put_one_xfer(handle, t);
+	return ret;
+}
+
+static int scmi_clock_describe_rates_get(struct scmi_handle *handle, u32 clk_id,
+					 struct clock_info *clk)
+{
+	u64 *rate;
+	int ret, cnt;
+	bool rate_discrete;
+	u32 tot_rate_cnt = 0;
+	u16 num_returned, num_remaining;
+	struct scmi_xfer *t;
+	struct scmi_msg_clock_describe_rates *clk_desc;
+	struct scmi_msg_resp_clock_describe_rates *rlist;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_DESCRIBE_RATES,
+				 SCMI_PROTOCOL_CLOCK, sizeof(*clk_desc), 0, &t);
+	if (ret)
+		return ret;
+
+	clk_desc = (struct scmi_msg_clock_describe_rates *)t->tx.buf;
+	rlist = (struct scmi_msg_resp_clock_describe_rates *)t->rx.buf;
+
+	do {
+		clk_desc->id = cpu_to_le32(clk_id);
+		/* Set the number of rates to be skipped/already read */
+		clk_desc->rate_index = cpu_to_le32(tot_rate_cnt);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			break;
+
+		num_returned = le16_to_cpu(rlist->num_returned);
+		num_remaining = le16_to_cpu(rlist->num_remaining);
+		rate_discrete = RATE_DISCRETE(num_remaining);
+		num_remaining &= NUM_RETURNED_MASK;
+
+		if (tot_rate_cnt + num_returned > MAX_NUM_RATES) {
+			dev_err(handle->dev, "No. of rates > MAX_NUM_RATES");
+			break;
+		}
+
+		if (!rate_discrete) {
+			clk->range.min_rate = RATE_TO_U64(rlist->rate[0]);
+			clk->range.max_rate = RATE_TO_U64(rlist->rate[1]);
+			clk->range.step_size = RATE_TO_U64(rlist->rate[2]);
+			dev_dbg(handle->dev, "Min %llu Max %llu Step %llu Hz\n",
+				clk->range.min_rate, clk->range.max_rate,
+				clk->range.step_size);
+			break;
+		}
+
+		rate = &clk->rates[tot_rate_cnt];
+		for (cnt = 0; cnt < num_returned; cnt++, rate++) {
+			*rate = RATE_TO_U64(rlist->rate[cnt]);
+			dev_dbg(handle->dev, "Rate %llu Hz\n", *rate);
+		}
+
+		tot_rate_cnt += num_returned;
+		/*
+		 * check for both returned and remaining to avoid infinite
+		 * loop due to buggy firmware
+		 */
+	} while (num_returned && num_remaining);
+
+	clk->num_rates = tot_rate_cnt;
+
+	scmi_put_one_xfer(handle, t);
+	return ret;
+}
+
+static int
+scmi_clock_rate_get(struct scmi_handle *handle, u32 clk_id, u64 *value)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_RATE_GET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(__le32), sizeof(u64), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		__le32 *pval = (__le32 *)t->rx.buf;
+
+		*value = le32_to_cpu(*pval);
+		*value  |= le32_to_cpu(*(pval + 1));
+	}
+
+	scmi_put_one_xfer(handle, t);
+	return ret;
+}
+
+static int scmi_clock_rate_set(struct scmi_handle *handle, u32 clk_id,
+			       u32 config, u64 rate)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_clock_set_rate *cfg;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_RATE_SET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = (struct scmi_clock_set_rate *)t->tx.buf;
+	cfg->flags = cpu_to_le32(config);
+	cfg->id = cpu_to_le32(clk_id);
+	cfg->value_low = cpu_to_le32(rate & 0xffffffff);
+	cfg->value_high = cpu_to_le32(rate >> 32);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_put_one_xfer(handle, t);
+	return ret;
+}
+
+static int
+scmi_clock_config_set(struct scmi_handle *handle, u32 clk_id, u32 config)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_clock_set_config *cfg;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_CONFIG_SET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = (struct scmi_clock_set_config *)t->tx.buf;
+	cfg->id = cpu_to_le32(clk_id);
+	cfg->attributes = cpu_to_le32(config);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_put_one_xfer(handle, t);
+	return ret;
+}
+
+static int scmi_clock_enable(struct scmi_handle *handle, u32 clk_id)
+{
+	return scmi_clock_config_set(handle, clk_id, CLOCK_ENABLE);
+}
+
+static int scmi_clock_disable(struct scmi_handle *handle, u32 clk_id)
+{
+	return scmi_clock_config_set(handle, clk_id, 0);
+}
+
+static struct scmi_clk_ops clk_ops = {
+	.rate_get = scmi_clock_rate_get,
+	.rate_set = scmi_clock_rate_set,
+	.enable = scmi_clock_enable,
+	.disable = scmi_clock_disable,
+};
+
+int scmi_clock_protocol_init(struct scmi_handle *handle)
+{
+	int clk_id;
+	u32 version;
+
+	if (!scmi_is_protocol_implemented(handle, SCMI_PROTOCOL_CLOCK)) {
+		dev_err(handle->dev, "SCMI Clock protocol not implemented\n");
+		return -EPROTONOSUPPORT;
+	}
+
+	scmi_version_get(handle, SCMI_PROTOCOL_CLOCK, &version);
+
+	dev_dbg(handle->dev, "Clock Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	scmi_clock_protocol_attributes_get(handle, &clocks);
+
+	clocks.clk = devm_kcalloc(handle->dev, clocks.num_clocks,
+				  sizeof(struct clock_info), GFP_KERNEL);
+	if (!clocks.clk)
+		return -ENOMEM;
+
+	dev_info(handle->dev, "Num Clock %d Max Async Req %d\n",
+		 clocks.num_clocks, clocks.max_async_req);
+
+	for (clk_id = 0; clk_id < clocks.num_clocks; clk_id++) {
+		struct clock_info *clk = clocks.clk + clk_id;
+
+		scmi_clock_attributes_get(handle, clk_id, clk);
+		scmi_clock_describe_rates_get(handle, clk_id, clk);
+	}
+
+	handle->clk_ops = &clk_ops;
+
+	return 0;
+}
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index e153f05720e4..32873a315c76 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -31,6 +31,7 @@
 #define PROTOCOL_REV_MINOR(x)	((x) & PROTOCOL_REV_MINOR_MASK)
 #define MAX_PROTOCOLS_IMP	16
 #define MAX_OPPS		16
+#define MAX_NUM_RATES		16
 
 enum scmi_std_protocol {
 	SCMI_PROTOCOL_BASE = 0x10,
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 0f25a3defb4c..75ba10441f54 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -46,6 +46,22 @@ struct scmi_revision_info {
 struct scmi_handle;
 
 /**
+ * struct scmi_clk_ops - represents the various operations provided
+ *	by SCMI Clock Protocol
+ *
+ * @rate_get: request the current clock rate of a clock
+ * @rate_set: set the clock rate of a clock
+ * @enable: enables the specified clock
+ * @disable: disables the specified clock
+ */
+struct scmi_clk_ops {
+	int (*rate_get)(struct scmi_handle *, u32, u64*);
+	int (*rate_set)(struct scmi_handle *, u32, u32, u64);
+	int (*enable)(struct scmi_handle *, u32);
+	int (*disable)(struct scmi_handle *, u32);
+};
+
+/**
  * struct scmi_perf_ops - represents the various operations provided
  *	by SCMI Performance Protocol
  *
@@ -73,11 +89,13 @@ struct scmi_perf_ops {
  * @dev: pointer to the SCMI device
  * @version: pointer to the structure containing SCMI version information
  * @perf_ops: pointer to set of performance protocol operations
+ * @clk_ops: pointer to set of clock protocol operations
  */
 struct scmi_handle {
 	struct device *dev;
 	struct scmi_revision_info *version;
 	struct scmi_perf_ops *perf_ops;
+	struct scmi_clk_ops *clk_ops;
 };
 
 struct scmi_opp {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux