On 06/06/2017 01:30 AM, Stefan Agner wrote: > Add i.MX 7 APBH DMA and GPMI NAND modules. > > Signed-off-by: Stefan Agner <stefan@xxxxxxxx> > --- > arch/arm/boot/dts/imx7s.dtsi | 32 ++++++++++++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi > index c4f12fd..d71acd8 100644 > --- a/arch/arm/boot/dts/imx7s.dtsi > +++ b/arch/arm/boot/dts/imx7s.dtsi > @@ -995,5 +995,37 @@ > status = "disabled"; > }; > }; > + > + dma_apbh: dma-apbh@33000000 { > + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; > + reg = <0x33000000 0x2000>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; > + #dma-cells = <1>; > + dma-channels = <4>; > + clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; > + clock-names = "dma_apbh_bch", "dma_apbh_io"; please remove the clock names, I am good with all other changes. > + }; > + > + gpmi: gpmi-nand@33002000{ > + compatible = "fsl,imx7d-gpmi-nand"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; > + reg-names = "gpmi-nand", "bch"; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "bch"; > + clocks = <&clks IMX7D_NAND_RAWNAND_CLK>, > + <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; > + clock-names = "gpmi_io", "gpmi_bch_apb"; > + dmas = <&dma_apbh 0>; > + dma-names = "rx-tx"; > + status = "disabled"; > + assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>; > + }; > }; > }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html