This patch adds support for the APM X-Gene SoC SATA host controller driver.
It requires the corresponding APM X-Gene SoC PHY driver.
Signed-off-by: Loc Ho <lho@xxxxxxx>
Signed-off-by: Tuan Phan <tphan@xxxxxxx>
Signed-off-by: Suman Tripathi <stripathi@xxxxxxx>
---
drivers/ata/Kconfig | 8 +
drivers/ata/Makefile | 1 +
drivers/ata/sata_xgene.c | 1047 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1056 insertions(+), 0 deletions(-)
create mode 100644 drivers/ata/sata_xgene.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4e73772..cd1bc3c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,14 @@ config AHCI_IMX
If unsure, say N.
+config SATA_XGENE
+ tristate "APM X-Gene 6.0Gbps SATA host controller support"
+ depends on ARM64 || COMPILE_TEST
+ select SATA_AHCI_PLATFORM
+ select PHY_XGENE
+ help
+ This option enables support for APM X-Gene SoC SATA host controller.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 46518c6..1c0fabe 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
+obj-$(CONFIG_SATA_XGENE) += sata_xgene.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/sata_xgene.c b/drivers/ata/sata_xgene.c
new file mode 100644
index 0000000..d69943e
--- /dev/null
+++ b/drivers/ata/sata_xgene.c
@@ -0,0 +1,1047 @@
+/*
+ * AppliedMicro X-Gene SoC SATA Host Controller Driver
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Loc Ho <lho@xxxxxxx>
+ * Tuan Phan <tphan@xxxxxxx>
+ * Suman Tripathi <stripathi@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/phy/phy.h>
+#include "ahci.h"
+
+/* Controller who PHY shared with SGMII Ethernet PHY */
+#define XGENE_AHCI_SGMII_DTS "apm,xgene-ahci-sgmii"
+
+/* Controller who PHY (internal reference clock macro) shared with PCIe */
+#define XGENE_AHCI_PCIE_DTS "apm,xgene-ahci-pcie"
+
+/* Max # of disk per a controller */
+#define MAX_AHCI_CHN_PERCTR 2
+
+#define SATA_ENET_MUX_OFFSET 0x00007000
+#define SATA_DIAG_OFFSET 0x0000D000
+#define SATA_GLB_OFFSET 0x0000D850
+#define SATA_SHIM_OFFSET 0x0000E000
+#define SATA_MASTER_OFFSET 0x0000F000
+#define SATA_PORT0_OFFSET 0x00000100
+#define SATA_PORT1_OFFSET 0x00000180
+
+/* MUX CSR */
+#define SATA_ENET_CONFIG_REG 0x00000000
+#define CFG_SATA_ENET_SELECT_MASK 0x00000001
+
+/* SATA host controller CSR */
+#define SLVRDERRATTRIBUTES 0x00000000
+#define SLVWRERRATTRIBUTES 0x00000004
+#define MSTRDERRATTRIBUTES 0x00000008
+#define MSTWRERRATTRIBUTES 0x0000000c
+#define BUSCTLREG 0x00000014
+#define IOFMSTRWAUX 0x00000018
+#define INTSTATUSMASK 0x0000002c
+#define ERRINTSTATUS 0x00000030
+#define ERRINTSTATUSMASK 0x00000034
+
+/* SATA host AHCI CSR */
+#define PORTCFG 0x000000a4
+#define PORTADDR_SET(dst, src) \
+ (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f))
+#define PORTPHY1CFG 0x000000a8
+#define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \
+ (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000))
+#define PORTPHY2CFG 0x000000ac
+#define PORTPHY3CFG 0x000000b0
+#define PORTPHY4CFG 0x000000b4
+#define PORTPHY5CFG 0x000000b8
+#define SCTL0 0x0000012C
+#define PORTPHY5CFG_RTCHG_SET(dst, src) \
+ (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000))
+#define PORTAXICFG_EN_CONTEXT_SET(dst, src) \
+ (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000))
+#define PORTAXICFG 0x000000bc
+#define PORTAXICFG_OUTTRANS_SET(dst, src) \
+ (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000))
+
+/* SATA host controller slave CSR */
+#define INT_SLV_TMOMASK 0x00000010
+
+/* SATA global diagnostic CSR */
+#define REGSPEC_CFG_MEM_RAM_SHUTDOWN 0x00000070
+#define REGSPEC_BLOCK_MEM_RDY 0x00000074
+
+/* AHBC IOB flush CSR */
+#define CFG_AMA_MODE 0x0000e014
+#define CFG_RD2WR_EN 0x00000002
+
+struct xgene_ahci_context {
+ struct ahci_host_priv hpriv;
+ struct device *dev;
+ int irq;
+ void __iomem *csr_base; /* CSR base address of IP */
+ void __iomem *mmio_base; /* AHCI I/O base address */
+ void __iomem *ahbc_csr_base; /* Used for IOB flushing if non-zero */
+ void __iomem *ahbc_io_base; /* Used for IOB flushing if non-zero */
+
+ struct phy *phy;
+};
+
+static void xgene_rd(void *addr, u32 *val)
+{
+ *val = readl(addr);
+ pr_debug("X-Gene SATA CSR RD: 0x%p value: 0x%08x\n", addr, *val);
+}
+
+static void xgene_wr(void *addr, u32 val)
+{
+ writel(val, addr);
+ pr_debug("X-Gene SATA CSR WR: 0x%p value: 0x%08x\n", addr, val);
+}
+
+static void xgene_wr_flush(void *addr, u32 val)
+{
+ writel(val, addr);
+ pr_debug("X-Gene SATA CSR WR: 0x%p value: 0x%08x\n", addr, val);
+ val = readl(addr); /* Force a barrier */
+}
+
+static int xgene_ahci_get_channel(struct ata_host *host, struct ata_port *port)
+{
+ int i;
+ for (i = 0; i < host->n_ports; i++)
+ if (host->ports[i] == port)
+ return i;
+ return -1;
+}
+
+static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx)
+{
+ void *diagcsr = ctx->csr_base + SATA_DIAG_OFFSET;
+ int try;
+ u32 val;
+
+ xgene_rd(diagcsr + REGSPEC_CFG_MEM_RAM_SHUTDOWN, &val);
+ if (val == 0) {
+ dev_dbg(ctx->dev, "memory already released from shutdown\n");
+ return 0;
+ }
+ dev_dbg(ctx->dev, "Release memory from shutdown\n");
+ /* SATA controller memory in shutdown. Remove from shutdown. */
+ xgene_wr_flush(diagcsr + REGSPEC_CFG_MEM_RAM_SHUTDOWN, 0x00);
+
+ /* Check for at least ~1ms */
+ try = 1000;
+ do {
+ xgene_rd(diagcsr + REGSPEC_BLOCK_MEM_RDY, &val);
+ if (val != 0xFFFFFFFF)
+ usleep_range(1, 100);
+ } while (val != 0xFFFFFFFF && try-- > 0);
+ if (try <= 0) {
+ dev_err(ctx->dev, "failed to release memory from shutdown\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/*
+ * Custom Query ID command
+ *
+ * Due to HW errata, we must stop and re-start the port state machine after
+ * read ID command.
+ */
+static unsigned int xgene_ahci_read_id(struct ata_device *dev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ u32 err_mask;
+ struct ata_port *ap = dev->link->ap;
+ void *port_mmio = ahci_port_base(ap);
+ u32 data32;
+
+ err_mask = ata_do_dev_read_id(dev, tf, id);
+ if (err_mask)
+ return err_mask;
+
+ /* Mask reserved area. Bit78 spec of Link Power Management
+ * bit15-8: reserved
+ * bit7: NCQ autosence
+ * bit6: Software settings preservation supported
+ * bit5: reserved
+ * bit4: In-order sata delivery supported
+ * bit3: DIPM requests supported
+ * bit2: DMA Setup FIS Auto-Activate optimization supported
+ * bit1: DMA Setup FIX non-Zero buffer offsets supported
+ * bit0: Reserved
+ *
+ * Clear reserved bit (DEVSLP bit) as we don't support DEVSLP
+ */
+ id[78] &= 0x00FF;
+
+ /* Restart the port if requred due to HW errata */
+ data32 = readl(port_mmio + PORT_CMD_ISSUE);
+ if (data32 == 0x00000000) {
+ writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+ writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+ }
+ return 0;
+}
+
+/*
+ * Custom QC issue
+ *
+ * Due to HW errata, we must stop and re-start the port state machine after
+ * read ID command.
+ */
+static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* Keep track of the currently active link. It will be used
+ * in completion path to determine whether NCQ phase is in
+ * progress.
+ */
+ pp->active_link = qc->dev->link;
+
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
+
+ if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
+ fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+ writel(fbs, port_mmio + PORT_FBS);
+ pp->fbs_last_dev = qc->dev->link->pmp;
+ }
+
+ writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
+
+ ahci_sw_activity(qc->dev->link);
+
+ /* For query ID command, restart the port if requred due to HW errata.
+ This is needed when PMP is attached. */
+ if (qc->dev->link->pmp && qc->tf.command == ATA_CMD_ID_ATA &&
+ readl(port_mmio + PORT_CMD_ISSUE) == 0x0) {
+ writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+ writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+ }
+
+ return 0;
+}
+
+static void xgene_ahci_enable_phy(struct xgene_ahci_context *ctx,
+ int channel, int enable)
+{
+ void *mmio = ctx->mmio_base;
+ u32 val;
+
+ xgene_rd(mmio + PORTCFG, &val);
+ val = PORTADDR_SET(val, channel == 0 ? 2 : 3);
+ xgene_wr_flush(mmio + PORTCFG, val);
+ xgene_rd(mmio + PORTPHY1CFG, &val);
+ val = PORTPHY1CFG_FRCPHYRDY_SET(val, enable);
+ xgene_wr(mmio + PORTPHY1CFG, val);
+}
+
+static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel)
+{
+ void *mmio = ctx->mmio_base;
+ u32 val;
+
+ dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n",
+ mmio, channel);
+ xgene_rd(mmio + PORTCFG, &val);
+ val = PORTADDR_SET(val, channel == 0 ? 2 : 3);
+ xgene_wr_flush(mmio + PORTCFG, val);
+ /* Disable fix rate */
+ xgene_wr_flush(mmio + PORTPHY1CFG, 0x0001fffe);
+ xgene_wr_flush(mmio + PORTPHY2CFG, 0x5018461c);
+ xgene_wr_flush(mmio + PORTPHY3CFG, 0x1c081907);
+ xgene_wr_flush(mmio + PORTPHY4CFG, 0x1c080815);
+ xgene_rd(mmio + PORTPHY5CFG, &val);
+ /* Window negotiation 0x800 to 0x400 */
+ val = PORTPHY5CFG_RTCHG_SET(val, 0x300);
+ xgene_wr_flush(mmio + PORTPHY5CFG, val);
+ xgene_rd(mmio + PORTAXICFG, &val);
+ val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* enable context mgmt */
+ val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Outstanding */
+ xgene_wr_flush(mmio + PORTAXICFG, val);
+}
+
+/* Restart the PHY */
+static int xgene_ahci_phy_restart(struct ata_link *link)
+{
+ struct ata_port *port = link->ap;
+ struct ata_host *host = port->host;
+ struct xgene_ahci_context *ctx = host->private_data;
+ int channel;
+
+ channel = xgene_ahci_get_channel(host, port);
+ if (channel < 0 || channel >= MAX_AHCI_CHN_PERCTR)
+ return -EINVAL;
+ xgene_ahci_enable_phy(ctx, channel, 1);
+ xgene_ahci_enable_phy(ctx, channel, 0);
+ return 0;
+}
+
+static int xgene_ahci_do_hardreset(struct ata_link *link, int chan,
+ unsigned long deadline, bool *online)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ struct ata_port *ap = link->ap;
+ struct xgene_ahci_context *ctx = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_taskfile tf;
+ int link_retry = 0;
+ int retry = 0;
+ int rc;
+ u32 val;
+
+hardreset_retry:
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+ rc = sata_link_hardreset(link, timing, deadline, online,
+ ahci_check_ready);
+ /* clear all errors */
+ xgene_rd(port_mmio + PORT_SCR_ERR, &val);
+ xgene_wr(port_mmio + PORT_SCR_ERR, val);
+
+ /* Check to ensure that the disk comes up in match speed */
+ if (*online) {
+ u32 sstatus;
+ sata_scr_read(link, SCR_STATUS, &sstatus);
+ if (!retry) {
+ if (((sstatus >> 4) & 0xf) == 2) {
+ /* For Gen2 and first time, let's check again
+ * with Gen2 serdes to ensure actual Gen2 disk.
+ */
+ phy_set_speed(ctx->phy, chan, 3000000000ULL);
+ xgene_ahci_phy_restart(link);
+ ++retry;
+ goto hardreset_retry;
+ } else if (((sstatus >> 4) & 0xf) == 1) {
+ /* For Gen1 and first time, let's check again
+ * with Gen1 serdes to ensure actual Gen1 disk.
+ */
+ phy_set_speed(ctx->phy, chan, 1500000000ULL);
+ xgene_ahci_phy_restart(link);
+ ++retry;
+ goto hardreset_retry;
+ }
+ }
+ } else if (link_retry < 4) {
+ link_retry++;
+ goto hardreset_retry;
+ }
+ ata_link_dbg(link, "channel %d post-hardrest PORT_CMD 0x%08X\n",
+ chan, readl(port_mmio + PORT_CMD));
+
+ return rc;
+}
+
+static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ bool online;
+ int chan;
+ int rc;
+ int portcmd_saved;
+ u32 portclb_saved;
+ u32 portclbhi_saved;
+ u32 portrxfis_saved;
+ u32 portrxfishi_saved;
+
+ chan = xgene_ahci_get_channel(ap->host, ap);
+ if (chan >= MAX_AHCI_CHN_PERCTR) {
+ *class = ATA_DEV_NONE;
+ return 0;
+ }
+ ata_link_dbg(link, "channel %d APM hardreset\n", chan);
+
+ /* As hardreset reset these CSR, let save it to restore later */
+ portcmd_saved = readl(port_mmio + PORT_CMD);
+ portclb_saved = readl(port_mmio + PORT_LST_ADDR);
+ portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI);
+ portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR);
+ portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI);
+
+ ahci_stop_engine(ap);
+
+ rc = xgene_ahci_do_hardreset(link, chan, deadline, &online);
+
+ /* As controller hardreset clear them, let restore them */
+ writel(portcmd_saved, port_mmio + PORT_CMD);
+ writel(portclb_saved, port_mmio + PORT_LST_ADDR);
+ writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI);
+ writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR);
+ writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI);
+
+ ahci_start_engine(ap);
+
+ if (online)
+ *class = ahci_dev_classify(ap);
+
+ ata_link_dbg(link, "channel %d APM hardreset EXIT class %u\n",
+ chan, *class);
+ return rc;
+}
+
+/* Flush the IOB to ensure all SATA controller writes completed before
+ servicing the completed command. This is needed due to the possibility
+ that interrupt serviced before the data actually written to the cache/DDR.
+ Writes from the IP to the CPU domain is not synchronized with the IRQ
+ line or the IP core toggled the CI bits before the data write completed. */
+static int xgene_ahci_iob_flush(struct xgene_ahci_context *ctx)
+{
+ if (ctx->ahbc_io_base)
+ readl(ctx->ahbc_io_base);
+ return 0;
+}
+
+static void xgene_ahci_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ int is_atapi = ata_is_atapi(qc->tf.protocol);
+ void *cmd_tbl;
+ u32 opts;
+ const u32 cmd_fis_len = 5; /* five dwords */
+ unsigned int n_elem;
+ void *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+
+ /*
+ * Fill in command table information. First, the header,
+ * a SATA Register - Host to Device command FIS.
+ */
+ cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
+
+ /* Due to hardware errata for port multipier CBS mode, enable DEV
+ field of PxFBS in order to clear the PxCI */
+ fbs = readl(port_mmio + 0x40);
+ if (qc->dev->link->pmp || ((fbs >> 8) & 0x0000000f)) {
+ fbs &= 0xfffff0ff;
+ fbs |= qc->dev->link->pmp << 8;
+ writel(fbs, port_mmio + 0x40);
+ }
+
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
+ if (is_atapi) {
+ memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
+ memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
+ }
+ n_elem = 0;
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ n_elem = ahci_fill_sg(qc, cmd_tbl);
+
+ /*
+ * Fill in command slot information.
+ */
+ opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ opts |= AHCI_CMD_WRITE;
+ if (is_atapi)
+ opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
+
+ ahci_fill_cmd_slot(pp, qc->tag, opts);
+}
+
+/* Due to HW BUG we are limited to single FIS receive area for FBS so
+ * limiting the FBS FIS area from 16 to 0.
+ */
+static bool xgene_ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ u8 *rx_fis = pp->rx_fis;
+
+ /*
+ * After a successful execution of an ATA PIO data-in command,
+ * the device doesn't send D2H Reg FIS to update the TF and
+ * the host should take TF and E_Status from the preceding PIO
+ * Setup FIS.
+ */
+ if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
+ !(qc->flags & ATA_QCFLAG_FAILED)) {
+ ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
+ qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
+ } else {
+ ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
+ }
+
+ return true;
+}
+
+static int xgene_ahci_do_softreset(struct ata_link *link,
+ unsigned int *class, int pmp,
+ unsigned long deadline,
+ int (*check_ready) (struct ata_link *link))
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ const char *reason = NULL;
+ unsigned long now, msecs;
+ struct ata_taskfile tf;
+ int rc;
+
+ ata_link_dbg(link, "ENTER\n");
+
+ /* prepare for SRST (AHCI-1.1 10.4.1) */
+ rc = ahci_kick_engine(ap);
+ if (rc && rc != -EOPNOTSUPP)
+ ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc);
+
+ ata_tf_init(link->device, &tf);
+ /* issue the first D2H Register FIS */
+ msecs = 0;
+ now = jiffies;
+ if (time_after(deadline, now))
+ msecs = jiffies_to_msecs(deadline - now);
+
+ tf.ctl |= ATA_SRST;
+ if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
+ rc = -EIO;
+ reason = "1st FIS failed";
+ goto fail;
+ }
+
+ /* spec says at least 5us, but be generous and sleep for 1ms */
+ ata_msleep(ap, 1);
+
+ /* issue the second D2H Register FIS */
+ tf.ctl &= ~ATA_SRST;
+ /* HW need AHCI_CMD_RESET and AHCI_CMD_CLR_BUSY */
+ ahci_exec_polled_cmd(ap, pmp, &tf, 0,
+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs);
+ /* wait for link to become ready */
+ rc = ata_wait_after_reset(link, deadline, check_ready);
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_info(link, "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
+ reason = "device not ready";
+ goto fail;
+ } else {
+ *class = ahci_dev_classify(ap);
+ }
+
+ ata_link_dbg(link, "EXIT, class=%u\n", *class);
+ return 0;
+
+fail:
+ ata_link_err(link, "softreset failed (%s)\n", reason);
+ return rc;
+}
+
+static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+ return xgene_ahci_do_softreset(link, class, pmp, deadline,
+ ahci_check_ready);
+}
+
+static struct ata_port_operations xgene_ahci_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = xgene_ahci_hardreset,
+ .read_id = xgene_ahci_read_id,
+ .qc_issue = xgene_ahci_qc_issue,
+ .qc_fill_rtf = xgene_ahci_qc_fill_rtf,
+ .qc_prep = xgene_ahci_qc_prep,
+ .softreset = xgene_ahci_softreset,
+ .pmp_softreset = xgene_ahci_softreset,
+};
+
+static const struct ata_port_info xgene_ahci_port_info[] = {
+ {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &xgene_ahci_ops,
+ },
+};
+
+static struct scsi_host_template xgene_ahci_sht = {
+ AHCI_SHT("XGene-ahci"),
+};
+
+static void xgene_ahci_port_intr(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
+ u32 status, qc_active = 0;
+ int rc;
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ /* ignore BAD_PMP while resetting */
+ if (unlikely(resetting))
+ status &= ~PORT_IRQ_BAD_PMP;
+
+ /* if LPM is enabled, PHYRDY doesn't mean anything */
+ if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) {
+ status &= ~PORT_IRQ_PHYRDY;
+ ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
+ }
+
+ if (unlikely(status & PORT_IRQ_ERROR)) {
+ ahci_error_intr(ap, status);
+ return;
+ }
+
+ if (status & PORT_IRQ_SDB_FIS) {
+ /* If SNotification is available, leave notification
+ * handling to sata_async_notification(). If not,
+ * emulate it by snooping SDB FIS RX area.
+ *
+ * Snooping FIS RX area is probably cheaper than
+ * poking SNotification but some constrollers which
+ * implement SNotification, ICH9 for example, don't
+ * store AN SDB FIS into receive area.
+ */
+ if (hpriv->cap & HOST_CAP_SNTF)
+ sata_async_notification(ap);
+ else {
+ /* If the 'N' bit in word 0 of the FIS is set,
+ * we just received asynchronous notification.
+ * Tell libata about it.
+ *
+ * Lack of SNotification should not appear in
+ * ahci 1.2, so the workaround is unnecessary
+ * when FBS is enabled.
+ */
+ if (pp->fbs_enabled)
+ WARN_ON_ONCE(1);
+ else {
+ const __le32 *f = pp->rx_fis + RX_FIS_SDB;
+ u32 f0 = le32_to_cpu(f[0]);
+ if (f0 & (1 << 15))
+ sata_async_notification(ap);
+ }
+ }
+ }
+
+ /* pp->active_link is not reliable once FBS is enabled, both
+ * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because
+ * NCQ and non-NCQ commands may be in flight at the same time.
+ */
+ if (pp->fbs_enabled) {
+ if (ap->qc_active) {
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
+ qc_active |= readl(port_mmio + PORT_CMD_ISSUE);
+ }
+ } else {
+ /* pp->active_link is valid iff any command is in flight */
+ if (ap->qc_active && pp->active_link->sactive)
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
+ else
+ qc_active = readl(port_mmio + PORT_CMD_ISSUE);
+ }
+
+ /* Flush the IOB before servicing interrupt to ensure all data
+ written by the controller appears in DDR */
+ xgene_ahci_iob_flush((struct xgene_ahci_context *) hpriv);
