On 06/05/2017 09:51 AM, Florian Fainelli wrote: > On 06/01/2017 11:34 PM, Anup Patel wrote: >> This patchset adds initial support of Broadcom Stingray SOC >> by reusing existing Broadcom iProc device drivers. >> >> Most of the patches in this patchset are DT patches except >> the Stingray clock tree support which just one patch. >> >> This patchset is based on Linux-4.12-rc3 and it is also available >> at stingray-v6 branch of https://github.com/Broadcom/arm64-linux.git >> >> Changes since v5: >> - Rebased patches for Linux-4.12-rc3 >> - Update DT node names to match register offset >> >> Changes since v4: >> - Reduce number of include headers in Stingray clk driver >> >> Changes since v3: >> - Rebased patches for Linux-4.12-rc1 >> - Updated PATCH3 to have all clocks except genpll3 to be >> registered via platform driver probe >> >> Changes since v2: >> - Remove default bootargs from chosen DT node >> - Remove "linux" prefix from stdout DT attribute of chosen DT node >> - Remove use of GIC_CPU_MASK_xxx() for PPIs >> >> Changes since v1: >> - Rebased patches for Linux-4.12-rc1 >> - Removed unwanted /memreserve/ from bcm958742-base.dtsi >> - Use ranges DT property to clear view of memory-layout >> - Make bcm-sr.h part of clock DT bindings patch >> >> Anup Patel (3): >> dt-bindings: bcm: Add Broadcom Stingray bindings document >> arm64: dts: Initial DTS files for Broadcom Stingray SOC >> arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray >> >> Oza Pawandeep (1): >> arm64: dts: Add I2C DT nodes for Stingray SoC >> >> Pramod Kumar (3): >> arm64: dts: Add NAND DT nodes for Stingray SOC >> arm64: dts: Add pinctrl DT nodes for Stingray SOC >> arm64: dts: Add GPIO DT nodes for Stingray SOC >> >> Sandeep Tripathy (3): >> dt-bindings: clk: Extend binding doc for Stingray SOC >> clk: bcm: Add clocks for Stingray SOC >> arm64: dts: Add clock DT nodes for Stingray SOC >> >> Srinath Mannam (1): >> arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC > > Applied patches 1, 4-11 to devicetree-arm64/next, thanks! Also took patch 2, to make sure everything builds properly, Stephen, let me know if you want me to take patch #3 as well. Thanks! -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
