Re: [PATCHv13 00/40] ARM: TI SoC clock DT conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/10/2014 06:13 PM, Felipe Balbi wrote:
Hi,

On Fri, Jan 10, 2014 at 11:52:49AM +0200, Tero Kristo wrote:
On 01/10/2014 01:15 AM, Felipe Balbi wrote:
Hi,

On Thu, Jan 09, 2014 at 03:22:03PM -0600, Nishanth Menon wrote:
So, bad luck number release for this, as v12 wasn't sufficient still.

Changes compared to previous version:
- Dropped any changes to generic clock drivers, as it seems impossible
   to agree anything in short term, this means the patch set shrank in
   size from 49 patches to 40 (first 9 patches were dropped).
- Copy pasted implementation for clk-divider and clk-mux from drivers/clk
   to drivers/clk/ti, and made the modifications needed to the TI version
   of the clock drivers only (based on discussions with Mike, this is fine)
- Changed name of clk_ll_ops to ti_clk_ll_ops so that this doesn't conflict
   with any generic implementation we might have at some point, migrating
   this to the generic version should be easy enough also.
- Fixed trace_clk_div_div_ck for omap4, this node was broken in previous
   versions and resulted into an orphan clock node
- Fixed compile problem for omap5 only build reported by Felipe
- Fixed a couple of sparse warnings
- changed the mach-omap2/clock.c to use readl_relaxed / writel_relaxed
   instead of __raw_readl / __raw_writel

Testing done:
- omap3-beagle: boot / suspend-resume (RET) / suspend-resume (OFF)
- omap4-panda-es: boot / suspend-resume (RET)
- omap5-uevm: boot
- am335x-bone: boot
- dra7-evm: boot

Maintainer friendly branches also available:

tree: https://github.com/t-kristo/linux-pm.git

clk driver only (Mike): clk-next-dt-clks-v13
DTS data only (Benoit): dts_for_3.14-dt-clks-v13
full-branch (Tony/Paul): 3.13-rc7-dt-clks-v13

-Tero


Maintainer branches conflicts (using 3.13-rc7-dt-clks-v13):
=============================
Conflict resolution during rebase to maintainer's -14 branches:

1. (trivial) Against mike's clk-next dbdf6ff Merge branch
'clk-next-unregister' into clk-next

Could not apply 2edf7ad... CLK: TI: add DT alias clock registration
mechanism
conflict drivers/clk/Makefile (trivial fix)

2. (manual, but changes are easy) Against Tony's omap-for-v3.14/be
fc6ca98 ARM: OMAP: debug-leds: raw read and write endian fix

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

conflicts with be changes on Tony's be branch.
commit 80f304dd2360cf5d50953c4eb4e902536f6a1263
     ARM: OMAP2+: raw read and write endian fix

Conflict:
arch/arm/mach-omap2/clkt_clksel.c
arch/arm/mach-omap2/clkt_dpll.c
arch/arm/mach-omap2/clkt_iclk.c
arch/arm/mach-omap2/clock.c
arch/arm/mach-omap2/clock36xx.c
arch/arm/mach-omap2/dpll3xxx.c
arch/arm/mach-omap2/dpll44xx.c

Both change raw_readls -> should now be just clk api instead which
already does readl_relaxed etc.. If Tony feels like, then we should
probably post a branch based on 'be' branch for easy merge.

3. I could not detect any merge conflict against Benoit's queued up
series (but maybe he has'nt pushed everything to remote tree)..


Patch verification report:
==========================
Report: http://pastebin.mozilla.org/3976492


* sparse warning added in [PATCH 06/40] CLK: ti: add support for ti
divider-clock, [PATCH 10/40] clk: ti: add support for basic mux clock
+drivers/clk/ti/divider.c: warning: context imbalance in
'ti_clk_divider_set_rate' - different lock contexts for basic block
+drivers/clk/ti/mux.c: warning: context imbalance in
'ti_clk_mux_set_parent' - different lock contexts for basic block

* checkpatch warning [PATCH 16/40] CLK: TI: add am33xx clock init
file, [PATCH 18/40] CLK: TI: add omap3 clock init file
WARNING: static const char * array should probably be static const
char * const


Boot reports:
=============
- previous orphan clocks seem solved.
- All available platforms seem to boot fine and no regression could be
seen on initial view

OMAP2430:
   1. SDP2430
     before: http://pastebin.mozilla.org/3976359
     after: http://pastebin.mozilla.org/3976467

AM335x:
   2. am335x-evm
     before: http://pastebin.mozilla.org/3976284
     after: http://pastebin.mozilla.org/3976374
   3. am335x-sk
     before: http://pastebin.mozilla.org/3976295
     after: http://pastebin.mozilla.org/3976375
   4. BeagleBone Black:
     before: http://pastebin.mozilla.org/3976321
     after: http://pastebin.mozilla.org/3976441

AM3517:
   5. am3517-evm
     before: http://pastebin.mozilla.org/3976297
     after: http://pastebin.mozilla.org/3976397
   6. craneboard
     before: http://pastebin.mozilla.org/3976322
     after: http://pastebin.mozilla.org/3976452

OMAP3430:
   7. ldp
     before: http://pastebin.mozilla.org/3976356
     after: http://pastebin.mozilla.org/3976455
   8. sdp3430
     before: http://pastebin.mozilla.org/3976360
     after: http://pastebin.mozilla.org/3976468

OMAP3630/DM3730:
   9. am37x-evm
     before: http://pastebin.mozilla.org/3976300
     after: http://pastebin.mozilla.org/3976398
   10. beagle-XM
     before: http://pastebin.mozilla.org/3976319
     after: http://pastebin.mozilla.org/3976440

OMAP4430:
   11. SDP4430
     before: http://pastebin.mozilla.org/3976361
     after: http://pastebin.mozilla.org/3976470

OMAP4460:
   12. PandaBoard-ES
     before: http://pastebin.mozilla.org/3976358
     after: http://pastebin.mozilla.org/3976456

OMAP5432:
   13. OMAP5uEVM
     before: http://pastebin.mozilla.org/3976362 (no boot)
     after: http://pastebin.mozilla.org/3976471 (boot)

DRA7:
   14. dra7evm
     before: http://pastebin.mozilla.org/3976354 (no boot)
     after: http://pastebin.mozilla.org/3976453 (boot)

AM437x:
   15. am43xx-epos + out-of-tree patches for engineering samples
     before: http://pastebin.mozilla.org/3976306 (no boot)
     after: http://pastebin.mozilla.org/3976399 (boot)

to add here, I ran 70 different randconfigs, all seeds are available on
pastebin (took RMK's 4430sdp seed as a starting point):

am33xx-only.config	http://pastebin.com/nVA3xSwb
am43xx-only.config	http://pastebin.com/RbUdKuUh
dra7xx-only.config	http://pastebin.com/ribnaSzS
omap2-only.config	http://pastebin.com/QPUG0wqe
omap3-only.config	http://pastebin.com/B8ctX8yM
omap4-only.config	http://pastebin.com/3D8NAExm
omap5-only.config	http://pastebin.com/3mtQN38Z

Had a total of 16 failing builds, all .configs were also published on
pastebin:

config-am33xx-only.config-1	http://pastebin.com/5xhXZpev
config-am33xx-only.config-2	http://pastebin.com/NsrruJcQ
config-am33xx-only.config-3	http://pastebin.com/CGbB3qb8
config-am33xx-only.config-4	http://pastebin.com/86cu0uZ1
config-am43xx-only.config-1	http://pastebin.com/MCBCAd4X
config-am43xx-only.config-3	http://pastebin.com/hVpCgwSn
config-am43xx-only.config-4	http://pastebin.com/8SXAKHed
config-am43xx-only.config-6	http://pastebin.com/59riPMfw
config-am43xx-only.config-8	http://pastebin.com/03bt2VEZ
config-am43xx-only.config-9	http://pastebin.com/tePGwtWA
config-am43xx-only.config-10	http://pastebin.com/nrtXPqrF
config-omap2-only.config-2	http://pastebin.com/AKyvMqQU
config-omap2-only.config-4	http://paste.debian.net/75329
config-omap2-only.config-5	http://paste.debian.net/75330/
config-omap2-only.config-7	http://paste.debian.net/75332/
config-omap2-only.config-10	http://paste.debian.net/75333/

Failing configs all build fine on v3.13-rc7 except for
config-omap2-only.config-10, which fails due to a broken staging driver.


I think all of these fails are caused by the initially bugged
Makefile + Kconfig under mach-omap2. Seems like they can be fixed by
the patches I inlined at the end (will also post them as proper
patches to l-o list after this.) The question is, should Mike go
ahead and merge these along with the base clk patches or how should
we handle them? Patch 1 must be merged, patch 2 is a nice to have one
which allows DRA7 only builds (doing DRA7 only build currently seems
not possible.)

If it's OK with Tony, I would suggest having a branch with both patches
below which both Tony and Mike merge before merging CCF series. That way
we avoid bisection problems.

That reminds me, I think the baseline branch for the mach-omap2 patches is still somewhat unclear to me, what should be used for this? And which patches should be put there (the mach-omap2 patches depend on the drivers/clk/ti part basically, so I need to put at least those there also.)

-Tero

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux