The following devices/functionalities were added:
* Main and secondary UARTs.
* i2c and the pcf8563 device.
* Ethernet.
* NAND.
* The BP1 button.
* The LED.
* Watchdog
* SD.
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Stephen Warren <swarren@xxxxxxxxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
Cc: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: Eric Bénard <eric@xxxxxxxxxx>
Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
ChangeLog v9->v10:
- Added Fabio Estevam To the Cc list
ChangeLog v8->v9:
- Added the dtb target into arch/arm/boot/dts/Makefile.
- Added a blank line before the pcf8563 node in the i2c1 node.
- Whitespace cleanups as requested by Shawn Guo.
- _' was used in label, it's now fixed (it has been replaced with '-').
- The recently introduced defines for input and gpios are now used.
- The uarts had the fsl,uart-has-rtscts property set, but they didn't use
any rts and cts pins in the uart pinctrl nodes.
ChangeLog v7->v8:
- The commit message was improved.
- The board specific iomuxc pins group configuration that were in imx35.dtsi were moved here.
- The rest of the patch was updated accordingly.
ChangeLog v6->v7:
- Added Grant Likely in the Cc list.
- Shortened the license.
- The tsc2007 pads were moved in another patch.
ChangeLog v5->v6:
- Shawn Guo was added in the Cc.
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 59 +++++++++
.../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 127 ++++++++++++++++++++
3 files changed, 187 insertions(+)
create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 059d280..d41edc7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -143,6 +143,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx27-phytec-phycard-s-som.dtb \
imx27-phytec-phycard-s-rdk.dtb \
imx31-bug.dtb \
+ imx35-eukrea-mbimxsd35-baseboard.dtb \
imx50-evk.dtb \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 0000000..303f789
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+ memory {
+ reg = <0x80000000 0x8000000>; /* 128M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx35-eukrea {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX35_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX35_I2C1_PINGRP1>;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 0000000..8c46596
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx35-eukrea {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX35_PAD_LD18__GPIO3_24 0x80000000
+ MX35_PAD_LD19__GPIO3_25 0x80000000
+ MX35_PAD_LD23__GPIO3_29 0x80000000
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <MX35_AUDMUX_PINGRP1>;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <MX35_ESDHC1_PINGRP1>;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX35_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX35_I2C1_PINGRP1>;
+ };
+
+ pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+ fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX35_UART1_PINGRP1 MX35_UART1_RTSCTS_PINGRP1>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX35_UART2_PINGRP1 MX35_UART2_RTSCTS_PINGRP1>;
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
