Hi Fabien,
Thanks for your review.
On Mon, May 29, 2017 at 07:56:48AM +0000, Fabien DESSENNE wrote:
> Hi Cosar,
>
> Thank you for the patch
>
> On 22/05/17 16:34, Cosar Dindar wrote:
> > This patch adds CRC (CRC32 Crypto) support for STM32F4 series.
> >
> > As an hardware limitation polynomial and key setting are not supported.
> > They are fixed as 0x4C11DB7 (poly) and 0xFFFFFFFF (key).
> > CRC32C Castagnoli algorithm is not used.
> >
> > Signed-off-by: Cosar Dindar <cosardindar@xxxxxxxxx>
> > ---
> > drivers/crypto/stm32/stm32_crc32.c | 68 ++++++++++++++++++++++++++++++++------
> > 1 file changed, 58 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
> > index ec83b1e..12fbd98 100644
> > --- a/drivers/crypto/stm32/stm32_crc32.c
> > +++ b/drivers/crypto/stm32/stm32_crc32.c
> > @@ -7,6 +7,7 @@
> > #include <linux/bitrev.h>
> > #include <linux/clk.h>
> > #include <linux/module.h>
> > +#include <linux/of.h>
> > #include <linux/platform_device.h>
> >
> > #include <crypto/internal/hash.h>
> > @@ -39,6 +40,9 @@ struct stm32_crc {
> > struct clk *clk;
> > u8 pending_data[sizeof(u32)];
> > size_t nb_pending_bytes;
> > + bool key_support;
> > + bool poly_support;
> > + bool reverse_support;
> > };
> >
> > struct stm32_crc_list {
> > @@ -106,13 +110,31 @@ static int stm32_crc_init(struct shash_desc *desc)
> > }
> > spin_unlock_bh(&crc_list.lock);
> >
> > - /* Reset, set key, poly and configure in bit reverse mode */
> > - writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> > - writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> > - writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> > + /* set key */
> > + if (ctx->crc->key_support) {
> > + writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> > + } else if (mctx->key != CRC_INIT_DEFAULT) {
> > + dev_err(ctx->crc->dev, "Unsupported key value! Should be: 0x%x\n",
> > + CRC_INIT_DEFAULT);
> > + return -EINVAL;
> > + }
> > +
> > + /* set poly */
> > + if (ctx->crc->poly_support)
> > + writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> > +
> > + /* reset and configure in bit reverse mode if supported */
> > + if (ctx->crc->reverse_support)
> > + writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> > + else
> > + writel(CRC_CR_RESET, ctx->crc->regs + CRC_CR);
> > +
> > + /* store partial result */
> > + if (!ctx->crc->reverse_support)
> > + ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> > + else
> > + ctx->partial = readl(ctx->crc->regs + CRC_DR);
> >
> > - /* Store partial result */
> > - ctx->partial = readl(ctx->crc->regs + CRC_DR);
> > ctx->crc->nb_pending_bytes = 0;
> >
> > return 0;
> > @@ -135,7 +157,12 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
> >
> > if (crc->nb_pending_bytes == sizeof(u32)) {
> > /* Process completed pending data */
> > - writel(*(u32 *)crc->pending_data, crc->regs + CRC_DR);
> > + if (!ctx->crc->reverse_support)
> > + writel(bitrev32(*(u32 *)crc->pending_data),
> > + crc->regs + CRC_DR);
> > + else
> > + writel(*(u32 *)crc->pending_data,
> > + crc->regs + CRC_DR);
> > crc->nb_pending_bytes = 0;
> > }
> > }
> > @@ -143,10 +170,16 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
> > d32 = (u32 *)d8;
> > for (i = 0; i < length >> 2; i++)
> > /* Process 32 bits data */
> > - writel(*(d32++), crc->regs + CRC_DR);
> > + if (!ctx->crc->reverse_support)
> > + writel(bitrev32(*(d32++)), crc->regs + CRC_DR);
> > + else
> > + writel(*(d32++), crc->regs + CRC_DR);
> >
> > /* Store partial result */
> > - ctx->partial = readl(crc->regs + CRC_DR);
> > + if (!ctx->crc->reverse_support)
> > + ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> > + else
> > + ctx->partial = readl(crc->regs + CRC_DR);
> >
> > /* Check for pending data (non 32 bits) */
> > length &= 3;
> > @@ -243,6 +276,7 @@ static int stm32_crc_probe(struct platform_device *pdev)
> > struct stm32_crc *crc;
> > struct resource *res;
> > int ret;
> > + int algs_size;
> >
> > crc = devm_kzalloc(dev, sizeof(*crc), GFP_KERNEL);
> > if (!crc)
> > @@ -269,13 +303,26 @@ static int stm32_crc_probe(struct platform_device *pdev)
> > return ret;
> > }
> >
> > + /* set key, poly and reverse support if device is of F7 series */
> > + if (of_device_is_compatible(crc->dev->of_node, "st,stm32f7-crc")) {
> > + crc->key_support = true;
> > + crc->poly_support = true;
> > + crc->reverse_support = true;
> > + }
> > +
> > platform_set_drvdata(pdev, crc);
> >
> > spin_lock(&crc_list.lock);
> > list_add(&crc->list, &crc_list.dev_list);
> > spin_unlock(&crc_list.lock);
> >
> > - ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
> > + /* For F4 series only CRC32 algorithm will be used */
> > + if (of_device_is_compatible(crc->dev->of_node, "st,stm32f4-crc"))
> > + algs_size = 1;
> > + else
> > + algs_size = ARRAY_SIZE(algs);
> > +
> > + ret = crypto_register_shashes(algs, algs_size);
> > if (ret) {
> > dev_err(dev, "Failed to register\n");
> > clk_disable_unprepare(crc->clk);
> > @@ -304,6 +351,7 @@ static int stm32_crc_remove(struct platform_device *pdev)
> >
> > static const struct of_device_id stm32_dt_ids[] = {
> > { .compatible = "st,stm32f7-crc", },
> > + { .compatible = "st,stm32f4-crc", },
> > {},
> > };
> > MODULE_DEVICE_TABLE(of, stm32_dt_ids);
> Reviewed-by: Fabien Dessenne <fabien.dessenne@xxxxxx>
Best Regards.
Cosar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
