Hello,
The Marvell Armada 7K/8K SoCs are composed of two parts: the AP (which
contains the CPU cores) and the CP (which contains most
peripherals). The 7K SoCs have one CP, while the 8K SoCs have two CPs,
doubling the number of available peripherals.
In terms of interrupt handling, all devices in the CPs are connected
through wired interrupt to a unit called ICU located in each CP. This
unit converts the wired interrupts from the devices into memory
transactions.
Inside the AP, there is a GIC extension called GICP, which allows a
memory write transaction to trigger a GIC SPI interrupt. The ICUs in
each CP are therefore configured to trigger a memory write into the
appropriate GICP register so that a wired interrupt from a CP device
is converted into a memory write, itself converted into a regular GIC
SPI interrupt.
Until now, the configuration of the ICU was done statically by the
firmware, and therefore the Device Tree files in Linux were specifying
directly GIC interrupts for the interrupts of CP devices. However,
with the growing number of devices in the CP, a static allocation
scheme doesn't work for the long term.
This patch series therefore makes Linux aware of the ICU: GIC SPI
interrupts are dynamically allocated, and the ICU is configured
accordingly to route a CP wired interrupt to the allocated GIC SPI
interrupt.
In detail:
- The first two patches are the Device Tree binding patches
- The third patch is a minimal driver for the GICP unit, which simply
allows to allocate GICP interrupts.
- The fourth patch is the most important done, which adds the driver
for the ICU itself.
- The fifth patch adjust Kconfig.platforms to select the GICP and ICU
drivers.
- The last patch adjusts the Device Tree files of the Armada 7K/8K to
use the ICU.
Changes since v1:
- Fix the #interrupt-cells value in the ICU DT binding
example. Pointed by Marc Zyngier.
- Add details about the possible group types in the ICU DT binding
documentation, as requested by Marc Zyngier. This allowed to
discover that the list of types listed was not matching the macros
provided in <dt-bindings/interrupt-controller/mvebu-icu.h>, so this
was fixed as well.
- Changed the "gicp" property of the ICU to "marvell,gicp", as
suggested by Marc Zyngier.
- Add a marvell,spi-ranges property to the gicp node, which defines
which ranges of GIC SPI interrupts are available for us by the
GICP.
- Move more GICP logic into the gicp driver. Indeed, it was confusing
to have in the ICU driver some global logic mixed with per-ICU
logic: there is only one GICP per system, but one ICU per CP (so in
an Armada 8K we have one GICP but two ICUs). So it makes more sense
to handle the GICP aspects in one driver (which has only one
device) and the ICU aspects in another driver (which has one device
per ICU).
- Use writel_relaxed() as suggested by Marc Zyngier.
- Use irq_set_irqchip_state() in the ICU driver to clear any pending
interrupt when allocating an interrupt. This ensures we don't get
bothered by an interrupt left pending by the firmware. This
replaces a more manual pending interrupt clearing done in the GICP
driver, which wasn't suitable for edge triggered
interrupts. Suggested by Marc Zyngier.
- Use devm_kstrdup() instead of kstrdup() to fix a potential memory
leak in the error path of ICU's ->probe() function. Noticed by Marc
Zyngier.
- Change compatible strings from "marvell,gicp" to
"marvell,ap806-gicp" and "marvell,icu" to "marvell,cp110-icu", as
future versions of those IP blocks may be different. Suggested by
Yehuda Yitschak.
- Use a shorter name for the irqchip domain, suggested by Grégory
Clement.
- Rename ICU_{SATA0,SATA1}_IRQ_INT to ICU_{SATA0,SATA1}_ICU_ID to
clarify we're talking about ICU identifiers and not interrupt
numbers. Suggested by Yehuda Yitschak.
- Fix bogus message when checking the ICU group type, make sure the
message says "wrong ICU group type" and not "wrong ICU
type". Suggested by Yehuda Yitschak.
- Add a check that the ICU identifier used in the DT is not higher
than ICU_MAX_IRQS. Suggested by Yehuda Yitschak.
Best regards,
Thomas
Thomas Petazzoni (6):
dt-bindings: interrupt-controller: add DT binding for the Marvell GICP
dt-bindings: interrupt-controller: add DT binding for the Marvell ICU
irqchip: irq-mvebu-gicp: new driver for Marvell GICP
irqchip: irq-mvebu-icu: new driver for Marvell ICU
arm64: marvell: enable ICU and GICP drivers
arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
.../bindings/interrupt-controller/marvell,gicp.txt | 24 ++
.../bindings/interrupt-controller/marvell,icu.txt | 54 ++++
arch/arm64/Kconfig.platforms | 2 +
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 6 +
.../boot/dts/marvell/armada-cp110-master.dtsi | 60 ++--
.../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 54 ++--
drivers/irqchip/Kconfig | 6 +
drivers/irqchip/Makefile | 2 +
drivers/irqchip/irq-mvebu-gicp.c | 170 ++++++++++
drivers/irqchip/irq-mvebu-gicp.h | 15 +
drivers/irqchip/irq-mvebu-icu.c | 346 +++++++++++++++++++++
.../dt-bindings/interrupt-controller/mvebu-icu.h | 15 +
12 files changed, 706 insertions(+), 48 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
create mode 100644 drivers/irqchip/irq-mvebu-gicp.c
create mode 100644 drivers/irqchip/irq-mvebu-gicp.h
create mode 100644 drivers/irqchip/irq-mvebu-icu.c
create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
