The dwmac-sun8i hardware is present on the bananapi m3 It uses an external PHY rtl8211e via RGMII. This patch create the needed emac and phy nodes. Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx> --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index bb23904847d5..dcb4fa7e6eff 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -67,6 +67,23 @@ }; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,rx-delay-ps = <700>; + allwinner,tx-delay-ps = <700>; + + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html