Hi Richard, On Thu, 2017-06-01 at 09:23 -0500, richard.gong@xxxxxxxxxxxxxxx wrote: > From: Richard Gong <richard.gong@xxxxxxxxx> > > There are several changes in reset manager offsets from Arria10 to > Stratix10. This patch is based on one from Arria10 and adds offset > updates for Stratix10 > > Signed-off-by: Richard Gong <richard.gong@xxxxxxxxx> > --- > include/dt-bindings/reset/altr,rst-mgr-s10.h | 108 +++++++++++++++++++++++++++ > 1 file changed, 108 insertions(+) > create mode 100644 include/dt-bindings/reset/altr,rst-mgr-s10.h > > diff --git a/include/dt-bindings/reset/altr,rst-mgr-s10.h b/include/dt-bindings/reset/altr,rst-mgr-s10.h > new file mode 100644 > index 0000000..7978c21 > --- /dev/null > +++ b/include/dt-bindings/reset/altr,rst-mgr-s10.h > @@ -0,0 +1,108 @@ > +/* > + * Copyright (C) 2016 Intel Corporation. All rights reserved > + * Copyright (C) 2016 Altera Corporation. All rights reserved > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + * > + * derived from Steffen Trumtrar's "altr,rst-mgr-a10.h" > + */ > + > +#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H > +#define _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H > + > +/* MPUMODRST */ > +#define CPU0_RESET 0 > +#define CPU1_RESET 1 > +#define CPU2_RESET 2 > +#define CPU3_RESET 3 > + > +/* PER0MODRST */ > +#define EMAC0_RESET 32 > +#define EMAC1_RESET 33 > +#define EMAC2_RESET 34 > +#define USB0_RESET 35 > +#define USB1_RESET 36 > +#define NAND_RESET 37 > +/* 38 is empty */ > +#define SDMMC_RESET 39 > +#define EMAC0_OCP_RESET 40 > +#define EMAC1_OCP_RESET 41 > +#define EMAC2_OCP_RESET 42 > +#define USB0_OCP_RESET 43 > +#define USB1_OCP_RESET 44 > +#define NAND_OCP_RESET 45 > +/* 46 is empty */ > +#define SDMMC_OCP_RESET 47 > +#define DMA_RESET 48 > +#define SPIM0_RESET 49 > +#define SPIM1_RESET 50 > +#define SPIS0_RESET 51 > +#define SPIS1_RESET 52 > +#define DMA_OCP_RESET 53 > +#define EMAC_PTP_RESET 54 > +/* 55 is empty*/ > +#define DMAIF0_RESET 56 > +#define DMAIF1_RESET 57 > +#define DMAIF2_RESET 58 > +#define DMAIF3_RESET 59 > +#define DMAIF4_RESET 60 > +#define DMAIF5_RESET 61 > +#define DMAIF6_RESET 62 > +#define DMAIF7_RESET 63 > + > +/* PER1MODRST */ > +#define WATCHDOG0_RESET 64 > +#define WATCHDOG1_RESET 65 > +#define WATCHDOG2_RESET 66 > +#define WATCHDOG3_RESET 67 > +#define L4SYSTIMER0_RESET 68 > +#define L4SYSTIMER1_RESET 69 > +#define SPTIMER0_RESET 70 > +#define SPTIMER1_RESET 71 > +#define I2C0_RESET 72 > +#define I2C1_RESET 73 > +#define I2C2_RESET 74 > +#define I2C3_RESET 75 > +#define I2C4_RESET 76 > +/* 77-79 is empty */ > +#define UART0_RESET 80 > +#define UART1_RESET 81 > +/* 82-87 is empty */ > +#define GPIO0_RESET 88 > +#define GPIO1_RESET 89 > + > +/* BRGMODRST */ > +#define SOC2FPGA_RESET 96 > +#define LWHPS2FPGA_RESET 97 > +#define FPGA2SOC_RESET 98 > +#define F2SSDRAM0_RESET 99 > +#define F2SSDRAM1_RESET 100 > +#define F2SSDRAM2_RESET 101 > +#define DDRSCH_RESET 102 > + > +/* COLDMODRST */ > +#define CPUPO0_RESET 160 > +#define CPUPO1_RESET 161 > +#define CPUPO2_RESET 162 > +#define CPUPO3_RESET 163 > +/* 164-167 is empty */ > +#define L2_RESET 168 > + > +/* DBGMODRST */ > +#define DBG_RESET 224 > +#define CSDAP_RESET 225 > + > +/* TAPMODRST */ > +#define TAP_RESET 256 > + > +#endif > -- > 2.7.4 Applied, thanks. regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
