Hi Rob,
On 05/31/2017 02:12 PM, Rob Herring wrote:
> On Fri, May 26, 2017 at 11:53:15AM -0500, Suman Anna wrote:
>> Add the device tree bindings document for the Texas Instrument's
>> Keystone 2 DSP remoteproc devices.
>>
>> Signed-off-by: Suman Anna <s-anna@xxxxxx>
>> Signed-off-by: Sam Nelson <sam.nelson@xxxxxx>
>> ---
>> .../bindings/remoteproc/ti,keystone-rproc.txt | 132 +++++++++++++++++++++
>> 1 file changed, 132 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
>> new file mode 100644
>> index 000000000000..f1ba88edd00d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
>> @@ -0,0 +1,132 @@
>> +TI Keystone DSP devices
>> +=======================
>> +
>> +Binding status: Unstable - Subject to changes for using multiple memory regions
>
> I don't really see what would be unstable here. memory-region is easily
> extended to multiple entries.
OK will drop this line.
>
>> +
>> +The TI Keystone 2 family of SoCs usually have one or more (upto 8) TI DSP Core
>> +sub-systems that are used to offload some of the processor-intensive tasks or
>> +algorithms, for achieving various system level goals.
>> +
>> +These processor sub-systems usually contain additional sub-modules like L1
>> +and/or L2 caches/SRAMs, an Interrupt Controller, an external memory controller,
>> +a dedicated local power/sleep controller etc. The DSP processor core in
>> +Keystone 2 SoCs is usually a TMS320C66x CorePac processor.
>> +
>> +DSP Device Node:
>> +================
>> +Each DSP Core sub-system is represented as a single DT node. Each node has a
>> +number of required or optional properties that enable the OS running on the
>> +host processor (ARM CorePac) to perform the device management of the remote
>> +processor and to communicate with the remote processor.
>> +
>> +Required properties:
>> +--------------------
>> +The following are the mandatory properties:
>> +
>> +- compatible: Should be one of the following,
>> + "ti,k2hk-dsp" for DSPs on Keystone 2 66AK2H/K SoCs
>> + "ti,k2l-dsp" for DSPs on Keystone 2 66AK2L SoCs
>> + "ti,k2e-dsp" for DSPs on Keystone 2 66AK2E SoCs
>> +
>> +- reg: Should contain an entry for each value in 'reg-names'.
>> + Each entry should have the memory region's start address
>> + and the size of the region, the representation matching
>> + the parent node's '#address-cells' and '#size-cells' values.
>> +
>> +- reg-names: Should contain strings with the following names, each
>> + representing a specific internal memory region, and
>> + should be defined in this order,
>> + "l2sram", "l1pram", "l1dram"
>> +
>> +- label: Should contain a string identifying the DSP instance
>> + within the SoC. Should be the string "dsp" followed by
>> + the instance number. Eg: "dsp0", "dsp1",..."dsp7" etc
>
> Why does a user need to know or care?
This is used to distinguish the exact DSP instance from others since the
DT node name is a generic "dsp". One of the uses is to be able to
construct a firmware name within the driver using this label.
>
>> +
>> +- clocks: Should contain the device's input clock, and should be
>> + defined as per the bindings in,
>> + Documentation/devicetree/bindings/clock/keystone-gate.txt
>> +
>> +- ti,syscon-dev: Should be a pair of the phandle to the Keystone Device
>> + State Control node, and the register offset of the DSP
>> + boot address register within that node's address space.
>> +
>> +- resets: Should contain the phandle to the reset controller node
>> + managing the resets for this device, and a reset
>> + specifier. Please refer to the following reset bindings
>> + for the reset argument specifier as per SoC,
>> + Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
>> + for 66AK2HK/66AK2L/66AK2E SoCs
>> +
>> +- interrupt-parent: Should contain a phandle to the Keystone 2 IRQ controller
>> + IP node that is used by the ARM CorePac processor to
>> + receive interrupts from the DSP remote processors. See
>> + Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
>> + for details.
>> +
>> +- interrupts: Should contain an entry for each value in 'interrupt-names'.
>> + Each entry should have the interrupt source number used by
>> + the remote processor to the host processor. The values should
>> + follow the interrupt-specifier format as dictated by the
>> + 'interrupt-parent' node. The purpose of each is as per the
>> + description in the 'interrupt-names' property.
>> +
>> +- interrupt-names: Should contain strings with the following names, each
>> + representing a specific interrupt,
>> + "vring" - interrupt for virtio based IPC
>> + "exception" - interrupt for exception notification
>> +
>> +- kick-gpio: Should specify the gpio device needed for the virtio IPC
>
> -gpios
Will fix.
>
>> + stack. This will be used to interrupt the remote processor.
>> + The gpio device to be used is as per the bindings in,
>> + Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
>> +
>> +Optional properties:
>> +--------------------
>> +
>> +- memory-region: phandle to the reserved memory node to be associated
>> + with the remoteproc device. The reserved memory node
>> + can be a CMA memory node, and should be defined as
>> + per the bindings in
>> + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
>> +
>> +
>> +Example:
>> +--------
>> +
>> + /* 66AK2H/K DSP node in SoC DTS file */
>> + soc {
>> + dsp0: dsp@10800000 {
>> + compatible = "ti,k2hk-dsp";
>> + reg = <0x10800000 0x00100000>,
>> + <0x10e00000 0x00008000>,
>> + <0x10f00000 0x00008000>;
>> + reg-names = "l2sram", "l1pram", "l1dram";
>> + label = "dsp0";
>> + clocks = <&clkgem0>;
>> + ti,syscon-dev = <&devctrl 0x40>;
>> + resets = <&pscrst 0>;
>> + interrupt-parent = <&kirq0>;
>> + interrupts = <0 8>;
>> + interrupt-names = "vring", "exception";
>> + kick-gpio = <&dspgpio0 27 0>;
>> + };
>> +
>> + };
>> +
>> + /* K2HK EVM Board file */
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + dsp_common_cma_pool: dsp_common_cma_pool@81f800000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
>> + reusable;
>> + status = "okay";
>> + };
>> + };
>> +
>> + &dsp0 {
>> + memory-region = <&dsp_common_cma_pool>;
>> + };
Will also fix this up based on your comments on the Davinci remoteproc
driver binding.
regards
Suman
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
