On Tue, May 23, 2017 at 11:48:08AM +0200, Quentin Schulz wrote: > Some PHY require to wait for a bit after the reset GPIO has been > toggled. This adds support for the DT property `phy-reset-post-delay` > which gives the delay in milliseconds to wait after reset. > > If the DT property is not given, no delay is observed. Post reset delay > greater than 1000ms are invalid. > > Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx> > --- > > v2: > - return -EINVAL when phy-reset-post-delay is greater than 1000ms > instead of defaulting to 1ms, > - remove `default to 1ms` when phy-reset-post-delay > 1000Ms from DT > binding doc and commit log, > - move phy-reset-post-delay property reading before > devm_gpio_request_one(), > > Documentation/devicetree/bindings/net/fsl-fec.txt | 4 ++++ > drivers/net/ethernet/freescale/fec_main.c | 16 +++++++++++++++- > 2 files changed, 19 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt > index a1e3693cca16..6f55bdd52f8a 100644 > --- a/Documentation/devicetree/bindings/net/fsl-fec.txt > +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt > @@ -15,6 +15,10 @@ Optional properties: > - phy-reset-active-high : If present then the reset sequence using the GPIO > specified in the "phy-reset-gpios" property is reversed (H=reset state, > L=operation state). > +- phy-reset-post-delay : Post reset delay in milliseconds. If present then This needs unit suffix minimally. It should also have a vendor prefix or be made generic. But really, this is a property of the phy and should be in the phy node as should phy-reset-gpios, phy-reset-active-high, phy-supply, etc. > + a delay of phy-reset-post-delay milliseconds will be observed after the > + phy-reset-gpios has been toggled. Can be omitted thus no delay is > + observed. Delay is in range of 1ms to 1000ms. Other delays are invalid. > - phy-supply : regulator that powers the Ethernet PHY. > - phy-handle : phandle to the PHY device connected to this device. > - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
