Document the new optional "fsl,pmic_stby_poweroff" property. Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Cc: kernel@xxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: Liam Girdwood <lgirdwood@xxxxxxxxx> Cc: Mark Brown <broonie@xxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx --- Documentation/devicetree/bindings/regulator/pfuze100.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index 444c47831a40..216519c4a50d 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -4,6 +4,10 @@ Required properties: - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000" - reg: I2C slave address +Optional properties: +- fsl,pmic_stby_poweroff: if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Required child node: - regulators: This is the list of child nodes that specify the regulator initialization data for defined regulators. Please refer to below doc -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html