2017-05-26 19:31 GMT+08:00 Robin Murphy <robin.murphy@xxxxxxx>: > On 26/05/17 08:07, Eddie Cai wrote: >> firefly reload board not support sd card yet. so support it. > > I'm confused... According to pictures and the schematic the microSD > socket and vcc_sd supply are on the baseboard, not the core module, and > these nodes already exist in rk3288-firefly-reload.dts :/ agree, please ignore this patch > > Robin. > >> Signed-off-by: Eddie Cai <eddie.cai.linux@xxxxxxxxx> >> Reviewed-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> >> --- >> arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 31 +++++++++++++++++++++++ >> 1 file changed, 31 insertions(+) >> >> diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi >> index 413b61f..2f41209 100644 >> --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi >> +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi >> @@ -57,6 +57,17 @@ >> clock-output-names = "ext_gmac"; >> }; >> >> + vcc_sd: sdmmc-regulator { >> + compatible = "regulator-fixed"; >> + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sdmmc_pwr>; >> + regulator-name = "vcc_sd"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + startup-delay-us = <100000>; >> + vin-supply = <&vcc_io>; >> + }; >> >> vcc_flash: flash-regulator { >> compatible = "regulator-fixed"; >> @@ -281,6 +292,26 @@ >> rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; >> }; >> }; >> + >> + sdmmc { >> + sdmmc_pwr: sdmmc-pwr { >> + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> +}; >> + >> +&sdmmc { >> + bus-width = <4>; >> + cap-mmc-highspeed; >> + cap-sd-highspeed; >> + card-detect-delay = <200>; >> + disable-wp; >> + num-slots = <1>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; >> + vmmc-supply = <&vcc_sd>; >> + vqmmc-supply = <&vccio_sd>; >> + status = "okay"; >> }; >> >> &tsadc { >> > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html