Re: [PATCH] ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Christopher,

On Tue, May 30, 2017 at 5:16 PM,  <christopher.spinrath@xxxxxxxxxxxxxx> wrote:

> +       awnh387_pwrseq: pwrseq {
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_pwrseq>;
> +               compatible = "mmc-pwrseq-sd8787";
> +               powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> +               reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;

At least in the AW-NH387 datasheet I found it says:

RESETn: Reset(active low at least 10ns)

Please double check the polarity in device tree.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux