From: Stefan Wahren <stefan.wahren@xxxxxxxx> Date: Mon, 29 May 2017 13:57:08 +0200 > The Qualcomm QCA7000 HomePlug GreenPHY supports two interfaces: > UART and SPI. This patch series adds the missing support for UART. > > This driver based on the Qualcomm code [1], but contains some changes: > * use random MAC address per default > * use net_device_stats from device > * share frame decoding between SPI and UART driver > * improve error handling > * reimplement tty_wakeup with work queue (based on slcan) > * use new serial device bus instead of ldisc > > The patches 1 - 3 are just for clean up and are not related to > the UART support. Patch 4 adds SET_NETDEV_DEV() to qca_spi. > Patches 5 - 16 prepare the existing QCA7000 code for UART support. > The last patch contains the new driver. > > The code itself has been tested on a Freescale i.MX28 board and > a Raspberry Pi Zero. Series applied, thank you. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
