This adds device tree bindings for the Cortina Systems Gemini
PATA to SATA bridge.
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: John Feng-Hsin Chiang <john453@xxxxxxxxxxxxxxxx>
Cc: Greentime Hu <green.hu@xxxxxxxxx>
Acked-by: Hans Ulli Kroll <ulli.kroll@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v2->v3:
- No changes, just resending to keep the patch set together.
ChangeLog v1->v2:
- Fix ata0 misspelled as ata1 in one place.
---
.../bindings/ata/cortina,gemini-sata-bridge.txt | 55 ++++++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
new file mode 100644
index 000000000000..1c3d3cc70051
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
@@ -0,0 +1,55 @@
+* Cortina Systems Gemini SATA Bridge
+
+The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+takes two Faraday Technology FTIDE010 PATA controllers and bridges
+them in different configurations to two SATA ports.
+
+Required properties:
+- compatible: should be
+ "cortina,gemini-sata-bridge"
+- reg: registers and size for the block
+- resets: phandles to the reset lines for both SATA bridges
+- reset-names: must be "sata0", "sata1"
+- clocks: phandles to the compulsory peripheral clocks
+- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
+- syscon: a phandle to the global Gemini system controller
+- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
+ the ATA controller and SATA bridges. Values 0..3:
+ Mode 0: ata0 master <-> sata0
+ ata1 master <-> sata1
+ ata0 slave interface brought out on IDE pads
+ Mode 1: ata0 master <-> sata0
+ ata1 master <-> sata1
+ ata1 slave interface brought out on IDE pads
+ Mode 2: ata1 master <-> sata1
+ ata1 slave <-> sata0
+ ata0 master and slave interfaces brought out
+ on IDE pads
+ Mode 3: ata0 master <-> sata0
+ ata0 slave <-> sata1
+ ata1 master and slave interfaces brought out
+ on IDE pads
+
+Optional boolean properties:
+- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
+ The muxmode setting decides whether ATA0 or ATA1 is brought out,
+ and whether master, slave or both interfaces get brought out.
+- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
+ inside the Gemnini SoC. The Muxmode decides what PATA blocks will
+ be muxed out and how.
+
+Example:
+
+sata: sata@46000000 {
+ compatible = "cortina,gemini-sata-bridge";
+ reg = <0x46000000 0x100>;
+ resets = <&rcon 26>, <&rcon 27>;
+ reset-names = "sata0", "sata1";
+ clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+ <&gcc GEMINI_CLK_GATE_SATA1>;
+ clock-names = "SATA0_PCLK", "SATA1_PCLK";
+ syscon = <&syscon>;
+ cortina,gemini-ata-muxmode = <3>;
+ cortina,gemini-enable-ide-pins;
+ cortina,gemini-enable-sata-bridge;
+};
--
2.9.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
