Hello, This is v2 of the basic reset controller, which addresses the points that Philipp made. See the individual patches for changelogs. The original cover letter follows: In the Aspeed SoCs we have some reset registers spread out in various parts of the soc: in the system controller IP, as well as other peripherals. I need to be able to deassert those resets before other drivers work. In writing a driver to do this I realised it was very generic. So instead I've sent a generic driver that can be used by the device tree to clear reset lines described by single bits in a register. I've tested this driver on our SoC to release the UART reset. Joel Stanley (2): dt-bindings: reset: Add bindings for basic reset controller reset: Add basic single-register reset driver .../devicetree/bindings/reset/reset-basic.txt | 43 ++++++++ drivers/reset/Kconfig | 7 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-basic.c | 113 +++++++++++++++++++++ 4 files changed, 164 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/reset-basic.txt create mode 100644 drivers/reset/reset-basic.c -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
