Hi Keerthy, Thank you for your comment. On Mon, 29 May 2017 15:53:39 +0530 Keerthy <j-keerthy@xxxxxx> wrote: > > > On Monday 29 May 2017 02:45 PM, Kunihiko Hayashi wrote: > > Add a thermal driver for on-chip PVT (Process, Voltage and Temperature) > > monitoring unit implemented on UniPhier SoCs. This driver supports > > temperature monitoring and alert function. > > The Documentation in patch 2/4 should be squashed into this patch. According to the following guide, http://elixir.free-electrons.com/linux/latest/source/Documentation/devicetree/bindings/submitting-patches.txt 1) The Documentation/ portion of the patch should be a separate patch. I think it should be separated, how about that? > > > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> > > --- > > drivers/thermal/Kconfig | 8 + > > drivers/thermal/Makefile | 1 + > > drivers/thermal/uniphier_thermal.c | 390 +++++++++++++++++++++++++++++++++++++ > > 3 files changed, 399 insertions(+) > > create mode 100644 drivers/thermal/uniphier_thermal.c > > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > > index 776b343..93ccf25 100644 > > --- a/drivers/thermal/Kconfig > > +++ b/drivers/thermal/Kconfig > > @@ -453,4 +453,12 @@ config ZX2967_THERMAL > > the primitive temperature sensor embedded in zx2967 SoCs. > > This sensor generates the real time die temperature. > > > > +config UNIPHIER_THERMAL > > + tristate "Socionext UniPhier thermal driver" > > + depends on ARCH_UNIPHIER || COMPILE_TEST > > + help > > + Enable this to support thermal reporting on UniPhier SoC. > > + This driver supports CPU thermal zone to reports the temperture > > /s/temperture/temperature > > Or consider re-wording to > > "Enable this to plug in UniPhier on-chip PVT thermal driver into Linux > thermal framework. The driver supports CPU thermal zone temperature > reporting and a couple of trip points." Thanks for finding a typo and your re-wording. I'll fix it. > > + and trip points. > > + > > endif > > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > > index 7adae20..05b6e7c 100644 > > --- a/drivers/thermal/Makefile > > +++ b/drivers/thermal/Makefile > > @@ -58,3 +58,4 @@ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o > > obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o > > obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o > > obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o > > +obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o > > diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c > > new file mode 100644 > > index 0000000..ae7e5ce > > --- /dev/null > > +++ b/drivers/thermal/uniphier_thermal.c > > @@ -0,0 +1,390 @@ > > +/** > > + * uniphier_thermal.c - Socionext UniPhier thermal driver > > + * > > + * Copyright 2014 Panasonic Corporation > > + * Copyright 2016 Socionext Inc. > > Update this please. I see. I'll update it. > > + * All rights reserved. > > + * > > + * Author: > > + * Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> > > + * > > + * This program is free software: you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 of > > + * the License as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include <linux/bitops.h> > > +#include <linux/interrupt.h> > > +#include <linux/mfd/syscon.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <linux/regmap.h> > > +#include <linux/thermal.h> > > + > > +#include "thermal_core.h" > > + > > +/* > > + * block registers > > + * addresses are the offset from .block_base > > + */ > > +#define PVTCTLEN 0x0000 > > +#define PVTCTLEN_EN BIT(0) > > + > > +#define PVTCTLMODE 0x0004 > > +#define PVTCTLMODE_MASK 0xf > > +#define PVTCTLMODE_TEMPMON 0x5 > > + > > +#define EMONREPEAT 0x0040 > > +#define EMONREPEAT_ENDLESS BIT(24) > > +#define EMONREPEAT_PERIOD 0xf > > +#define EMONREPEAT_PERIOD_1000000 0x9 > > + > > +/* > > + * common registers > > + * addresses are the offset from .map_base > > + */ > > +#define PVTCTLSEL 0x0900 > > +#define PVTCTLSEL_MASK 0x7 > > +#define PVTCTLSEL_MONITOR 0 > > + > > +#define SETALERT0 0x0910 > > +#define SETALERT1 0x0914 > > +#define SETALERT2 0x0918 > > +#define SETALERT_TEMP_OVF (0xff << 16) > > +#define SETALERT_TEMP_OVF_VALUE(val) (((val) & 0xff) << 16) > > +#define SETALERT_EN BIT(0) > > + > > +#define PMALERTINTCTL 0x0920 > > +#define PMALERTINTCTL_CLR(ch) BIT(4 * (ch) + 2) > > +#define PMALERTINTCTL_SET(ch) BIT(4 * (ch) + 1) > > +#define PMALERTINTCTL_EN(ch) BIT(4 * (ch) + 0) > > +#define PMALERTINTCTL_MASK 0x777 > > + > > +#define TMOD 0x0928 > > +#define TMOD_MASK 0x1ff > > + > > +#define TMODCOEF 0x0e5c > > + > > +#define TMODSETUP0_EN BIT(30) > > +#define TMODSETUP0_VAL(val) (((val) & 0x3fff) << 16) > > +#define TMODSETUP1_EN BIT(15) > > +#define TMODSETUP1_VAL(val) ((val) & 0x7fff) > > + > > +/* SoC critical temperature is 95 degrees Celsius */ > > +#define CRITICAL_TEMP_LIMIT (95 * 1000) > > + > > +/* Max # of alert channels */ > > +#define ALERT_CH_NUM 3 > > + > > +/* SoC specific thermal sensor data */ > > +struct uniphier_tm_soc_data { > > + u32 map_base; > > + u32 block_base; > > + u32 tmod_setup_addr; > > +}; > > + > > +struct uniphier_tm_dev { > > + struct regmap *regmap; > > + bool alert_en[ALERT_CH_NUM]; > > + u32 tmod_calib0; > > + u32 tmod_calib1; > > + struct thermal_zone_device *tz_dev; > > + const struct uniphier_tm_soc_data *data; > > +}; > > + > > +static int uniphier_tm_initialize_sensor(struct uniphier_tm_dev *tdev) > > +{ > > + struct regmap *map = tdev->regmap; > > + u32 val; > > + int ret; > > + > > + /* stop PVT */ > > + regmap_write_bits(map, > > + tdev->data->block_base + PVTCTLEN, > > + PVTCTLEN_EN, 0); > > + > > + /* > > + * set default value if missing calibrated value > > + * > > + * Since SoC has a calibrated value that was set in advance, > > + * TMODCOEF shows non-zero and PVT refers the value internally. > > + * > > + * However, there is the case that some SoCs might not have the > > + * calibrated value. In that case, TMODCOEF shows zero and the driver > > + * has to set default value manually. > > + */ > > + ret = regmap_read(map, tdev->data->map_base + TMODCOEF, &val); > > + if (ret) > > + return ret; > > + if (!val) > > + regmap_write(map, > > + tdev->data->tmod_setup_addr, > > + TMODSETUP0_EN | > > I guess the above parameter could be included in the previous line. Here > and else where can save a number of lines. > > Ex: regmap_write(map, tdev->data->tmod_setup_addr, TMODSETUP0_EN | > > Can go in a single line. OK, I'll make an effort to save a number of lines including other lines. > > + TMODSETUP0_VAL(tdev->tmod_calib0) | > > + TMODSETUP1_EN | > > + TMODSETUP1_VAL(tdev->tmod_calib1)); > > + > > + /* select temperature mode */ > > + regmap_write_bits(map, > > + tdev->data->block_base + PVTCTLMODE, > > + PVTCTLMODE_MASK, > > + PVTCTLMODE_TEMPMON); > > + > > + /* set monitoring period */ > > + regmap_write_bits(map, > > + tdev->data->block_base + EMONREPEAT, > > + EMONREPEAT_ENDLESS | > > + EMONREPEAT_PERIOD, > > + EMONREPEAT_ENDLESS | > > + EMONREPEAT_PERIOD_1000000); > > + > > + /* set monitor mode */ > > + regmap_write_bits(map, > > + tdev->data->map_base + PVTCTLSEL, > > + PVTCTLSEL_MASK, PVTCTLSEL_MONITOR); > > + > > + return 0; > > +} > > + > > +static void uniphier_tm_set_alert(struct uniphier_tm_dev *tdev, u32 ch, > > + u32 temp) > > +{ > > + struct regmap *map = tdev->regmap; > > + > > + /* set alert temperature */ > > + regmap_write_bits(map, > > + tdev->data->map_base + SETALERT0 + (ch << 2), > > + SETALERT_EN | > > + SETALERT_TEMP_OVF, > > + SETALERT_EN | > > + SETALERT_TEMP_OVF_VALUE(temp / 1000)); > > +} > > + > > +static void uniphier_tm_enable_sensor(struct uniphier_tm_dev *tdev) > > +{ > > + struct regmap *map = tdev->regmap; > > + int i; > > + u32 bits = 0; > > + > > + for (i = 0; i < ALERT_CH_NUM; i++) > > + if (tdev->alert_en[i]) > > + bits |= PMALERTINTCTL_EN(i); > > + > > + /* enable alert interrupt */ > > + regmap_write_bits(map, > > + tdev->data->map_base + PMALERTINTCTL, > > + PMALERTINTCTL_MASK, bits); > > + > > + /* start PVT */ > > + regmap_write_bits(map, > > + tdev->data->block_base + PVTCTLEN, > > + PVTCTLEN_EN, PVTCTLEN_EN); > > +} > > + > > +static void uniphier_tm_disable_sensor(struct uniphier_tm_dev *tdev) > > +{ > > + struct regmap *map = tdev->regmap; > > + > > + /* disable alert interrupt */ > > + regmap_write_bits(map, > > + tdev->data->map_base + PMALERTINTCTL, > > + PMALERTINTCTL_MASK, 0); > > + > > + /* stop PVT */ > > + regmap_write_bits(map, > > + tdev->data->block_base + PVTCTLEN, > > + PVTCTLEN_EN, 0); > > +} > > + > > +static int uniphier_tm_get_temp(void *data, int *out_temp) > > +{ > > + struct uniphier_tm_dev *tdev = data; > > + struct regmap *map = tdev->regmap; > > + int ret; > > + u32 temp; > > + > > + ret = regmap_read(map, tdev->data->map_base + TMOD, &temp); > > + if (ret) > > + return ret; > > + > > + temp &= TMOD_MASK; > > + *out_temp = temp * 1000; /* millicelsius */ > > + > > + return 0; > > +} > > + > > +static const struct thermal_zone_of_device_ops uniphier_of_thermal_ops = { > > + .get_temp = uniphier_tm_get_temp, > > +}; > > + > > +static void uniphier_tm_irq_clear(struct uniphier_tm_dev *tdev) > > +{ > > + u32 mask = 0, bits = 0; > > + int i; > > + > > + for (i = 0; i < ALERT_CH_NUM; i++) { > > + mask |= (PMALERTINTCTL_CLR(i) | > > + PMALERTINTCTL_SET(i)); > > + bits |= PMALERTINTCTL_CLR(i); > > + } > > + > > + /* clear alert interrupt */ > > + regmap_write_bits(tdev->regmap, > > + tdev->data->map_base + PMALERTINTCTL, mask, bits); > > +} > > + > > +static irqreturn_t uniphier_tm_alarm_handler(int irq, void *_tdev) > > +{ > > + struct uniphier_tm_dev *tdev = _tdev; > > + > > + uniphier_tm_irq_clear(tdev); > > + thermal_zone_device_update(tdev->tz_dev, THERMAL_EVENT_UNSPECIFIED); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int uniphier_tm_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct regmap *regmap; > > + struct device_node *parent; > > + struct uniphier_tm_dev *tdev; > > + const struct thermal_trip *trips; > > + const u32 *calib; > > + int i, ret, irq, ntrips, crit_temp = INT_MAX; > > + > > + tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL); > > + if (!tdev) > > + return -ENOMEM; > > + > > + tdev->data = of_device_get_match_data(dev); > > + if (WARN_ON(!tdev->data)) > > + return -EINVAL; > > + > > + /* get irq */ > > + irq = platform_get_irq(pdev, 0); > > + if (irq < 0) > > + return irq; > > + > > + /* get tmod-calibration values */ > > + calib = of_get_property(dev->of_node, "socionext,tmod-calibration", > > + NULL); > > + if (calib) { > > + tdev->tmod_calib0 = of_read_number(calib, 1); > > + tdev->tmod_calib1 = of_read_number(calib + 1, 1); > > + } > > + > > + /* get regmap from syscon node */ > > + parent = of_get_parent(dev->of_node); /* parent should be syscon node */ > > + regmap = syscon_node_to_regmap(parent); > > + of_node_put(parent); > > + if (IS_ERR(regmap)) { > > + dev_err(dev, "failed to get regmap (error %ld)\n", > > + PTR_ERR(regmap)); > > + return PTR_ERR(regmap); > > + } > > + tdev->regmap = regmap; > > + > > + /* register sensor */ > > + tdev->tz_dev = devm_thermal_zone_of_sensor_register(dev, 0, tdev, > > + &uniphier_of_thermal_ops); > > + if (IS_ERR(tdev->tz_dev)) { > > + dev_err(dev, "failed to register sensor device\n"); > > + return PTR_ERR(tdev->tz_dev); > > + } > > + > > + /* get trip points */ > > + trips = of_thermal_get_trip_points(tdev->tz_dev); > > + ntrips = of_thermal_get_ntrips(tdev->tz_dev); > > + if (ntrips > ALERT_CH_NUM) { > > + dev_err(dev, "thermal zone has too many trips\n"); > > + return -E2BIG; > > + } > > + > > + /* initialize sensor */ > > + ret = uniphier_tm_initialize_sensor(tdev); > > + if (ret) { > > + dev_err(dev, "failed to initialize sensor\n"); > > + return ret; > > + } > > + for (i = 0; i < ntrips; i++) { > > + if (trips[i].type == THERMAL_TRIP_CRITICAL && > > + trips[i].temperature < crit_temp) > > + crit_temp = trips[i].temperature; > > + uniphier_tm_set_alert(tdev, i, trips[i].temperature); > > + tdev->alert_en[i] = true; > > + } > > + if (crit_temp > CRITICAL_TEMP_LIMIT) { > > + dev_err(dev, "critical trip is over limit(>%d), or not set\n", > > + CRITICAL_TEMP_LIMIT); > > + return -EINVAL; > > + } > > + > > + ret = devm_request_irq(dev, irq, uniphier_tm_alarm_handler, > > + 0, "thermal", tdev); > > + if (ret) > > + return ret; > > + > > + /* enable sensor */ > > + uniphier_tm_enable_sensor(tdev); > > + > > + platform_set_drvdata(pdev, tdev); > > + > > + return 0; > > +} > > + > > +static int uniphier_tm_remove(struct platform_device *pdev) > > +{ > > + struct uniphier_tm_dev *tdev = platform_get_drvdata(pdev); > > + > > + /* disable sensor */ > > + uniphier_tm_disable_sensor(tdev); > > + > > + return 0; > > +} > > + > > +static const struct uniphier_tm_soc_data uniphier_pxs2_tm_data = { > > + .map_base = 0xe000, > > + .block_base = 0xe000, > > + .tmod_setup_addr = 0xe904, > > +}; > > + > > +static const struct uniphier_tm_soc_data uniphier_ld20_tm_data = { > > + .map_base = 0xe000, > > + .block_base = 0xe800, > > + .tmod_setup_addr = 0xe938, > > +}; > > + > > +static const struct of_device_id uniphier_tm_dt_ids[] = { > > + { > > + .compatible = "socionext,uniphier-pxs2-thermal", > > + .data = &uniphier_pxs2_tm_data, > > + }, > > + { > > + .compatible = "socionext,uniphier-ld20-thermal", > > + .data = &uniphier_ld20_tm_data, > > + }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids); > > + > > +static struct platform_driver uniphier_tm_driver = { > > + .probe = uniphier_tm_probe, > > + .remove = uniphier_tm_remove, > > + .driver = { > > + .name = "uniphier-thermal", > > + .of_match_table = uniphier_tm_dt_ids, > > + }, > > +}; > > +module_platform_driver(uniphier_tm_driver); > > + > > +MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>"); > > +MODULE_DESCRIPTION("UniPhier thermal driver"); > > +MODULE_LICENSE("GPL v2"); > > Best Regards, Kunihiko Hayashi -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
