Hi Rafał,
On 05/29/2017 04:01 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>
> Some LEDs can be related to a specific device(s) described in the DT.
> This property allows specifying such relations. E.g. USB LED should
> usually be used to indicate some USB port(s) state.
>
> Please note this binding is designed to be generic and not influenced by
> any operating system design. Linux developers may find "trigger" part a
> bit confusing since in Linux triggers are separated drivers. It
> shouldn't define the binding though (we shouldn't add an extra level of
> indirection).
>
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---
> V2: Replace "usb-ports" with "led-triggers" property which is more generic and
> allows specifying other devices as well.
> V3: Use "trigger-sources" which is even more accurate as devices aren't
> precisely triggers.
> ---
> Documentation/devicetree/bindings/leds/common.txt | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index 24b656014089..e6e300975a4c 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -49,6 +49,19 @@ Optional properties for child nodes:
> - panic-indicator : This property specifies that the LED should be used,
> if at all possible, as a panic indicator.
>
> +- trigger-sources : List of devices which should be used as a source triggering
> + this LED activity. Some LEDs can be related to a specific
> + device and should somehow indicate its state. E.g. USB 2.0
> + LED may react to device(s) in a USB 2.0 port(s).
> + Another common example is switch or router with multiple
> + Ethernet ports each of them having its own LED assigned
> + (assuming they are not hardwired). In such cases this
> + property should contain phandle(s) of related source
> + device(s).
> + In many cases LED can be related to more than one device
> + (e.g. one USB LED vs. multiple USB ports) so a list of
> + sources can be specified.
> +
> Required properties for flash LED child nodes:
> - flash-max-microamp : Maximum flash LED supply current in microamperes.
> - flash-max-timeout-us : Maximum timeout in microseconds after which the flash
> @@ -69,6 +82,11 @@ gpio-leds {
> linux,default-trigger = "heartbeat";
> gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
> };
> +
> + usb {
> + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> + led-triggers = <&ohci_port1>, <&ehci_port1>;
Didn't you mean "trigger-sources" here instead?
> + };
> };
>
> max77693-led {
>
--
Best regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
