This series add several fixes to STM32 pinctrl: - Set input mode when PIN is used as interrupt - Implement .get_direction() gpio_chip callback - In DT: set each gpio controller as a interrupt controller. User who wants to use gpio as interrupt will have choice to use either "gpiolib" interface or "common" interrupt interface. Changes since v1: -rebase on 4.12-rc1 -Let gpiochip and irqchip orthogonal in stm32 pinctrl driver -Don't use gpiolib internal define Regards Alex Alexandre TORGUE (3): pinctrl: stm32: set pin to gpio input when used as interrupt pinctrl: stm32: Implement .get_direction gpio_chip callback ARM: dts: stm32: Set gpio controller also as interrupt controller arch/arm/boot/dts/stm32f429.dtsi | 22 +++++++++++++ arch/arm/boot/dts/stm32f746.dtsi | 22 +++++++++++++ drivers/pinctrl/stm32/pinctrl-stm32.c | 62 ++++++++++++++++++++++++++++------- drivers/pinctrl/stm32/pinctrl-stm32.h | 5 ++- 4 files changed, 98 insertions(+), 13 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
