Use the BIT macro for the CONFIG and INT register values. Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- drivers/net/ethernet/qualcomm/qca_7k.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/qca_7k.h b/drivers/net/ethernet/qualcomm/qca_7k.h index 1cad851..4047f0a 100644 --- a/drivers/net/ethernet/qualcomm/qca_7k.h +++ b/drivers/net/ethernet/qualcomm/qca_7k.h @@ -54,15 +54,15 @@ #define SPI_REG_ACTION_CTRL 0x1B00 /* SPI_CONFIG register definition; */ -#define QCASPI_SLAVE_RESET_BIT (1 << 6) +#define QCASPI_SLAVE_RESET_BIT BIT(6) /* INTR_CAUSE/ENABLE register definition. */ -#define SPI_INT_WRBUF_BELOW_WM (1 << 10) -#define SPI_INT_CPU_ON (1 << 6) -#define SPI_INT_ADDR_ERR (1 << 3) -#define SPI_INT_WRBUF_ERR (1 << 2) -#define SPI_INT_RDBUF_ERR (1 << 1) -#define SPI_INT_PKT_AVLBL (1 << 0) +#define SPI_INT_WRBUF_BELOW_WM BIT(10) +#define SPI_INT_CPU_ON BIT(6) +#define SPI_INT_ADDR_ERR BIT(3) +#define SPI_INT_WRBUF_ERR BIT(2) +#define SPI_INT_RDBUF_ERR BIT(1) +#define SPI_INT_PKT_AVLBL BIT(0) void qcaspi_spi_error(struct qcaspi *qca); int qcaspi_read_register(struct qcaspi *qca, u16 reg, u16 *result); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
