So far, the Cortina family phys (CS4340 in this particular case) are only supported in fixed link mode (via fixed_phy_register). The generic 10G phy driver does not work well with the phylib state machine, when the phy is registered via of_phy_connect. This prohibits the user from describing the phy nodes in the device tree. In order to support this scenario, and to properly describe the board device tree, add a minimal Cortina driver that reads the status from the right register. With the generic 10G C45 driver, the kernel will print messages like: [ 0.226521] mdio_bus 8b96000: Error while reading PHY16 reg at 1.6 [ 0.232780] mdio_bus 8b96000: Error while reading PHY16 reg at 1.5 v3 -> v4: - Add trademark info. - Minor documentation entry consistency nit. v2 -> v3: - Add documentation entry. v1 -> v2: - Change approach for getting the phy_id from hacking get_phy_c45_ids to describing the device in the device tree via ethernet-phy-id. More patch version changes per individual patches. Bogdan Purcareata (2): net: phy: Add Cortina CS4340 driver dt-bindings: net: Add Cortina device tree bindings Documentation/devicetree/bindings/net/cortina.txt | 21 ++++ drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/cortina.c | 118 ++++++++++++++++++++++ 4 files changed, 145 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/cortina.txt create mode 100644 drivers/net/phy/cortina.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
